Husqvarna DC 900 Operator's Manual page 22

WARNING:
or near a lifted product. Keep bystanders
away from the work area.
WARNING:
product. Make sure that the lifting eyes are
correctly installed and not damaged.
WARNING:
To attach the product to a
Refer to
transportation vehicle on page 22 for
information on how to transport the fan unit.
1. Remove the BigBag from the product.
2. Disconnect the hose between the fan unit and the
primary unit.
3. Lift the drawbar from the tow bar on the fan unit.
4. Tilt the drawbar until it is in a vertical position and
attach it to the primary unit with straps.
5. Put straps through the 8 lifting eyes on the main unit
and use lifting equipment to lift it.
x8
22
Do not walk or stay below
Do not lift a damaged
Do not lift the fan unit.
6. Lift the primary unit slowly.
To attach the product to a
transportation vehicle
Use the lifting eyes to attach the product to the
transportation vehicle.
1. To attach the primary unit to the transportation
vehicle, do the steps that follow:
a) Attach the tie-down straps in the lifting eyes.
b) Attach and tighten the tie-down straps to the
transportation vehicle.
2. To attach the fan unit to the transportation vehicle,
do the steps that follow:
a) Use a ramp to put the fan unit on a pallet.
b) Use tie-down straps to attach the fan unit to the
pallet and the dust extractor hose to the fan unit
(A).
c) Use wooden blocks to lock the wheels (B).
d) Use tie-down straps to attach the pallet with the
fan unit to the transportation vehicle.
To attach the product to a
transportation vehicle
Use the lifting eyes to attach the product to the
transportation vehicle.
1. Attach the tie-down straps in the lifting eyes.
2. Attach and tighten the tie-down straps to the
transportation vehicle.
Storage
CAUTION:
storage outdoors. Always keep the product
indoors.
• Keep the product in a dry and frost-free area.
• Clean the product and do a complete servicing
before you put the product in storage.
A
A
B
A
Do not put the product in
2154 - 002 - 25.10.2023