Samsung HT-X250 Instruction Manual page 25

Settings (con,t)
Setting the Test Tone
Use the Test Tone feature to check the speaker connections.
I In Stop mode, press the MENU button.
2 Press the Cursor v button to move to <Audio> and then press the ENTERbutton.
3 Press the Cursor v button to move to <TEST TONE> and then press the
ENTER button.
[] The test tone will be sent to L -, C -_ R -, SR -, SL -, SW in order
If the ENTER button is pressed again at this time, the test tone will stop.
Press the RETURN button to return to the previous level.
_" Press the EXIT button to exit the setup screen.
J Setting the Audio
You can adjust the balance and level for each speaker.
1 In Stop mode, press the MENU button.
2 Pressthe Cursor v button to move to <Audio> and then press the ENTERbutton,
3 Press the Cursor v button to move to <8OUND EDIT> and then press the
ENTER button.
4
Press the Cursor A, 'v' button to select and adjust the desired item.
Press the Cursor 4, _ button to adjust the settings.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
Start
L:FrontSpeaker ( L) C:Center S peaker SW:Sabw0oter
R:FrontSpeaker ( R) SL:RearSpeaker (L) SR:RearSpeaker ( R)
Press the TEST TONE button.
,, Test tone will be produced as follows:
When playing a DVD or CD, this will work only in Stop mode
,, Use this function to check that each speaker is correctly connected and that there is
no problem.
,, When HDMI AUDIO is on (audio is produced through TV speakers), the
TEST TONE function is not available.
To end the test tone, press the TEST TONE button again.
Press the 8OUND EDIT button and then press the Cursor 4, _ button.
Adjusting Front/RearSpeakerBalance
• You can select between 0, -6, and OFE
• The volume decreases as you move closer to -6.
Adjusting Center/Rear/Subwoofer Speaker Level
• The volume level can be adjusted in steps from +6dB to -6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
48 49