Connecting The Video Out To Tv - Samsung HT-X250 Instruction Manual

Connecting the Video Out to your TV
Choose one of the three methods for connecting to a T_L
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the HDMI IN
jack on your TV.
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from
the Component Video Output (Pr, Pb and Y) Jacks on the back of the DVD Player to the Component Video Input
Jacks on your TV.
Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack
on your TV.
• This product operates in Interlace scan mode(480i Only ) for Component Output.
• After making the video connection, set the Video input source on your TV to match the corresponding
Video output (HDMI, Component or Composite) on your Home theater.
See your TV owner's manual for more information on how to select the TV's Video Input source.
• If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the Home
Theater using the TV's remote control. This is only available with SAMSUNG TVs that support
Anynet+(HDMl-OEC).
• Pleasecheck the ¢_y,,,,+ logo. If your TV has an ¢l;;y,,,_+ logo, then it supportsthe Anynet+function.
HDNII Function
Resolution Selection
This function allows the user to select the screen resolution for HDMI output.
}
i ; }
:(
!:: ! !t2 > L[
( } : :
Why use HDMI(High Definition
Multimedia Interface)?
This device transmits a DVD
video signal digitally without
the process of converting to
anatog. You will get sharper
diqJtalpictures when using an
HDM connect on
In Stop mode, press and hold the SD/HD (Standard Definition/High Definition)
button on the remote control.
= Resolutions available for the HDMI output are 480p, 720p and 1080i.
= SD(Standard Definition) resolution is 480p and HD(HJgh Definition) resolution is 720p/1080i.
• If the TV does not support the configured resolution, you will not be able to see the
picture properly.
• Whenan HDMI c ableis connected, composite a ndcomponent video signals arenot output.
• See your TV owner's manual for more information on how to select the TV's Video
Input source.
Using Anynet+(HDMl-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control, Anynet + can be used by con-
necting this Home Theater to a SAMSUNG TV using an HDMt Cable. This is only available with SAMSUNG TVs that support Anynet+.
With Anynet+
You can operate this unit,
power on your TV, or watch a
movie by pressing the Play,
button on your Samsung TV s
remote contro.
Connect the main unit of the Home Theater to a Samsung TV with an HDMI cable.
(See page 18)
2 Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
mYoucan operatethe HomeTheaterby usingthe TV remotecontrol
(Available TV buttons:(_ ,_,_ ,(_ A, T and_, _ buttons, _ o_ _ _ button)
Set the Anynet+(HDMI-CEC) function to <On> on your TV.
[] <Receiver : On> : You can listen to audio through the Home Theater.
[] <Receiver : Off> : You can listen to audio through the TV
Select <THEATER to connector> and set the option of each items below.
[] <View TV> : If Anynet+ (HDMI-CEC) is on and you select View TV, the Home Theater will
automatically switch to DIGITAL IN.
[] <THEATER Menu> : You can access the Home Theater menu
[] <THEATER Operation> : The Home Theater disc playback information will be displayed.
[] <Receiver : On> : You can listen to audio through the Home Theater
[] <Receiver : Off> : You can listen to audio through the TV
• When selecting View TV, you must have a digital optical cable connected from the
TV to the Home Theater listen to the TV sound through the Home Theater.
• IfAnynet+ (HDMI-CEC)is on and you turn off the main unit, your TV will also turn off.
• Anynet+ (HDMI-CEC) will only work while in the DVD mode.
18 19