Wind River Linux; Overview; Boot Up And Login - Dell N01G Installation And Operation Manual

• Download the latest BIOS file from www.dell.com/support.
• USB 2.0 or USB 3.0 flash drive (4 GB minimum)
• Power off the Edge Gateway.
1. On a separate computer, unzip the BIOS update file that you have downloaded from www.dell.com.
2. Open the extracted file folder Edge_Gateway5000_1.X.X.
3. Copy the BIOS update file labeled as Edge_Gateway5000_1.X.X.exe to a USB flash drive.
4. Insert the USB flash drive in one of the available USB ports on the Edge Gateway.
5. Power on the Edge Gateway.
6. When the Dell logo is displayed on the screen, press F12 to enter the one-time boot screen.
7. On the one-time boot screen, select Flash the BIOS .
8. On the next screen, select the BIOS file (Edge_Gateway5000_1.X.X.exe) on the USB key.
9. Start the flash process.

Wind River Linux

Overview

The Edge Gateway is shipped with Wind River Linux IDP-XT version 3.1. For more information on Wind River operating system, see
www.windriver.com/support.
For generic details and references on running Wind River Linux IDP 3.1 on a Edge Gateway product, see
gatewaytraining.

Boot up and login

Before configuring the Wind River OS, connect a keyboard, mouse, and monitor to the Edge Gateway, or connect to the Edge
Gateway through a KVM session, Dell Wyse Cloud Client Manager (CCM), or Dell Command | Monitor (DCM).
NOTE: For more information about using the CCM, see the CCM documentation available at
www.cloudclientmanager.com.
NOTE: For more information about using the DCM, see the DCM documentation available at
clientsystemsmanagement.
Power On the Edge Gateway to boot into Wind River Linux OS. The Wind River Linux does not have a graphical user interface (GUI).
Log into the OS on the terminal with the following default credentials.
46
www.intel.com/
www.dell.com/