Test Mode Xsmall Vapore - Philips Saeco XSmall Service Manual

XSMALL
5.4.

Test mode XSmall Vapore

Double coffee LED
Selector
- coffee
- hot water
- steam
No water LED
This document describes the test mode of XSmall Vapore. This application is used in order to test the
machine in its mechanics and electronic components.
The machine enters in test mode by moving the knob in the Water position
then pushing the COFFEE short button
and then connecting the machine to the plug.
As long as the COFFEE short button is pressing the machine shows the Led Calc-Clean, Led Activity,
Led Alarm, Led NoWater, Led DoubleCoffee, flashing with rotation.
When the COFFEE short button is release the machine pass to the first level of the test.
There are 4 different level, in each level the coffee-machine can execute different commands,
Level 0: The machine can test the input signal:
a) Microswitch present of the brewing unit
b) Microswitch present of the dregdrawer
c) Microswitch door closed/opened
d) Button Short Coffee
e) Button Long Coffee
f) Button ON-OFF
g) Photosensor Water
h) hotosensor Steam (only in Middle-TOP model)
Level 1: The machine can test the loads in low voltage:
a) Brewing unit (24V DC)
Level 2: The machine can test the Pump load in high voltage:
a)Pump (120-230V AC)
Level 3: The machine can test the Heater load in high voltage:
a)Heater (120-230V AC)
Level 4: The machine can test the Grinder load in high voltage:
a)Grinder (320V DC)
Long Coffee
Short Coffee
Descaling LED
ON/OFF button
Activity LED
Warning LED
05 SERVICE MODE
14/20