Related Manuals for Samsung NSG6D 8 Series
Summary of Contents for Samsung NSG6D 8 Series
- Page 1 Gas Slide-in Range Installation manual NSG6D*8***** 01. DG68-01600A-00_IM_NSG6DG8700SRAA_EN_231102.indd 1 01. DG68-01600A-00_IM_NSG6DG8700SRAA_EN_231102.indd 1 2023-11-06 오전 11:47:43 2023-11-06 오전 11:47:43...
- Page 2 ANTI-TIP DEVICE WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal WARNING injury or death. • DO NOT store or use gasoline or other flammable vapors and ALL RANGES CAN TIP, RESULTING IN PERSONAL INJURY. liquids in the vicinity of this or any other appliance.
-
Page 3: Table Of Contents
Contents Installation requirements Before you begin Location requirements About this manual To avoid breakage Important note to the installer Gas requirements Important note to the consumer Special gas requirements (gas models sold in massachusetts) Important note to the servicer Electrical requirements Important safety information Installation instructions Read all instructions before using this appliance... -
Page 4: Before You Begin
Important safety information Before you begin Important safety information About this manual READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY. • All electrical and gas equipment with moving parts can be dangerous. Please read the important safety instructions for this appliance in this manual. The Important note to the installer instructions must be followed to minimize the risk of injury, death, or property damage. -
Page 5: California Proposition 65 Warning
California Proposition 65 Warning • Do not operate the range if the range or any part of the range is damaged, malfunctioning, or missing parts. • Do not use the range as a space heater. This range is to be used for cooking WARNING purposes only. -
Page 6: Fire Safety
Important safety information Fire safety Gas safety WARNING WARNING To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the following precautions. following precautions. •... -
Page 7: Electrical And Grounding Safety
Electrical and grounding safety Installation safety WARNING WARNING To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the following precautions. following precautions. •... -
Page 8: Location Safety
Important safety information • Make sure your range is correctly installed and adjusted by a qualified service Location safety technician or installer for the type of gas (natural or LP) you will use. For your range to utilize LP gas, the installer must replace the 5 surface burner orifices WARNING and 2 oven orifices with the provided LP orifice set, and reverse the GPR adapter. -
Page 9: Cooktop Safety
Cooktop safety • Make sure cookware handles are turned to the side or rear of the cooktop, but not over other surface burners. • Stand away from the range while frying. WARNING • Always heat frying oils slowly, and watch as they heat. If you are frying foods at To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the high heat, carefully watch during the cooking process. -
Page 10: Oven Safety
Important safety information Oven safety Storage drawer safety WARNING WARNING To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the following precautions. following precautions. -
Page 11: Self-Cleaning Oven Safety
Gas range components Self-cleaning oven safety What’s in the box WARNING Parts supplied To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the following precautions. • The self-cleaning feature operates the oven at temperatures high enough to burn away food soils in the oven. - Page 12 Gas range components Parts needed Tools needed Flat-blade Phillips screwdriver Open-end or Pipe wrench (2) screwdriver adjustable wrench Gas line shut-off Flexible metal Flare union adapter Flare union adapter valve appliance connector ¾ in or ½ in (NPT) x ½ in (NPT) x ½ in ½...
-
Page 13: Installation Requirements
Installation requirements Location requirements Clearances and dimensions BEFORE YOU BEGIN to install this appliance, refer to the following information, dimensions, and clearances. Do not locate the range where it may be subject to strong drafts. Provide adequate clearances between the range and adjacent 36 in combustible surfaces. - Page 14 Installation requirements Minimum dimensions WARNING If overhead cabinets are provided, a range hood should also be provided that projects horizontally a minimum of 5 in (12.7 cm) beyond the front of the cabinets. This will dissipate any heat buildup in the overhead cabinets to prevent death, personal injury, and/or fire hazard.
- Page 15 Installation guide Recommended locations for gas piping and electrical outlets (For model NSG6D*8*****) 3" 3" 24" 24" 25" 25" 3" 3" 24" 24" Recommended Recommended position position 17 in 17 in (43.2 cm) (43.2 cm) 35 35 ⁄ ⁄ " " 29 29 ⁄...
-
Page 16: To Avoid Breakage
Installation requirements To avoid breakage CAUTION Do NOT lift or handle the unit by the cooktop frame. CAUTION 1. The counter top around the cut-out • Please DO NOT push the unit strongly should be flat and leveled (See hatched when you install. -
Page 17: Gas Requirements
Gas requirements Special gas requirements (gas models sold in massachusetts) COMMONWEALTH OF MASSACHUSETTS REQUIREMENTS: Provide adequate gas supply WARNING This range is designed to operate at a pressure of 5 in (13 cm) of water column on • Gas leaks may occur in your system, creating a dangerous situation. natural gas or 10 in (25 cm) of water column on LP gas (propane or butane). -
Page 18: Electrical Requirements
Installation requirements Electrical requirements Grounding • All ranges must be grounded for personal safety. WARNING • All gas models have a power cord with an equipment-grounding conductor and a grounding plug. To reduce the risk of fire, electric shock, or personal injury: •... -
Page 19: Installation Instructions
Installation instructions Additional installation requirements for mobile homes Installing your gas range The installation of appliances designed for mobile home installation must conform IMPORTANT: with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part Please read the following instructions, as well as the Important Safety Instructions 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, section at the front of this manual, completely and carefully BEFORE installing Title 24, HUD, Part 280) or, when such standard is not applicable, the Standard... - Page 20 Installation instructions 4. Connect flexible metal appliance connector to the adapter on the range. Position WARNING range to permit connection at the shut-off valve. If the information in this manual is not followed exactly, a fire or explosion may 5. When all connections have been made, make sure all range controls are in the result, causing death, personal injury, or property damage.
- Page 21 All new gas ranges are shipped from the factory set up to use natural gas. Any WARNING Samsung gas range can be converted to use LP gas. Refer to page 55 in the User To reduce the risk of tipping, the appliance must be secured by properly installing Manual to contact a qualified service technician.
- Page 22 Installation instructions If the range is pulled from the wall for any reason, always repeat this procedure Step 6. Level the range to verify the range is properly secured by the anti-tip bracket. Never completely 1. Make sure the range is positioned where remove the leveling legs or the range will not be secured to the anti-tip device you want it.
- Page 23 Step 7. Assemble the surface burners Step 8. Check the ignition of surface burners Check the operation of all cooktop and oven burners after the range has been CAUTION installed and assembled, gas supply lines have been carefully checked for leaks, Do not operate the surface burners without and electrical power cord has been plugged in.
- Page 24 Installation instructions Checking the flame quality: Step 9. Final installation checklist All combustion flames need to be visually checked to determine their flame You have just completed installing your range. Make sure all controls are in the off quality. position and the flow of ventilation air to the range is unobstructed. The following is a checklist to confirm your range is safely installed and ready for operation.
-
Page 25: Adjusting The Oven Burner Air Adjustment Shutters
To check and adjust the oven burner air adjustment shutters: To adjust flame low setting 1. Open the oven door. Identify which burner is exhibiting too high or too low of simmer rate via manifold 2. Remove the oven racks. panel graphics. - Page 26 How-to Videos and Live Shows * Requires reader to be installed on your smartphone Scan this with your smartphone QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support Consumer Electronics www.samsung.com/ca/support (English) CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/ca_fr/support (French) DG68-01600A-00 01.