The Basic Steps - Boss Dr.Rhythm DR-550 Owner's Manual

[1]The Basic Steps
The Basic Steps
The following steps should be carried out when play is stopped.
38
(D Select the Song Edit mode by holding down |5ніғт) and pressing
Key Pad [2].
(2) With held down, use the numeric keys to select the number
(1 to 8) of the song which you will be creating (Here you should
momentarily remove your finger from [SHIFT] }.
* If performance data already exists at the song number you have
selected, you can at this point press and the measure number in
the display will increment, allowing you to check the data that has been
entered.
* Ifyou do not need the song data contained in the selected song number,
you can erase it using the procedure in Section Four, [3] "1. Erasing Song
Data" (p. 41).
(8) While holding down [SHIFT], press [BANK] to select the pattern
bank (A/B) in which is located the rhythm pattern that you wish to
write into the song.
* By pressing you can toggle between Bank A (programmable
patterns) and Bank B (preset patterns).
Using the numeric keys, select the number of the rhythm pattern (11
to 88) that you wish to put into the first measure of the song.
* If you wish to listen to the rhythm pattern that has been selected, press
[5ТАВТ].
(5) Press [АСС] (The selected rhythm pattern is entered into the first
measure, and the measure number will increment by one).
Repeat steps (4) апа (5) until everything up to the final measure has been
entered.
* A changeto the other pattern bank can be made any time you need to,
in the same manner as in step (3).
(6) If you have been playing the rhythm pattern, press
to get play to stop.
This completes the process needed to create a song.