Configuration Selection - Tunstall Vibby Installation Manual

Configuration Selection

It is possible to change the wearing option from the wrist strap to neck cord and change the radio
protocol. The radio protocol step should only be performed if this has previously been changed by
mistake. Once in Program Mode follow the steps below.
1) Press and hold the button.
2) Keep pushing the button until the green LED illuminates, then wait
for it to turn off.
3) When the Vibby vibrates release for Radio Protocol selection
(Radio Protocol selection page 6) OR;
4) When the red LED illuminates release for wearing mode selection.
(Wearing Mode selection page 7).
Page | 5