Advertisement
To monitor, proceed as follows:
Introduction to recording
Recording
@ Set function selector 68 to its lower position.
@ Set monitor selector @ to 'B'.
e Set speed selector 69 to the speed desired. The
@ Press pause key
@ Press start key @ and record key @ at the same
time.
@ For brief interruptions press pause key
@ To stop, press stop key @.
Playback
Post-fading
It is possible, during playback, to fade-out and
fade-in parts of the recording. This is particularly
useful when undesired applause, announcements,
background noise, etc. are present on the tape.
Caution should be taken when using the facility,
since incorrect use can spoil the recording. It is
recommended that an old dispensable recording is
used to gain experience of this facility as follows:
@ Play the tape and take note of the start and
duration in seconds of the piece to be faded-out.
7
Advertisement
