Water Tank; Document Box; Fuel Tank; Armature Box - Kässbohrer TANKER Series User Manual

Table of Contents

Advertisement

3.12.5. Water Tank

The vehicle may have a water tank for
general cleaning. You can turn the water
on by turning the faucet handle. You can
fill the water with the help of the filler
neck on the top of the tank.
There may be a soap dispenser on the
water tank. You can remove the soap
dispenser or fill the soap dispenser by
turning it counterclockwise.
Ignoring hygienic rules and
regulations is dangerous for
health. Wastewater must be
disposed of in accordance
with the regulations of the
country of residence.
The water in the water tank
should not be drunk. It should
be used for cleaning purposes
only.
In cold weather, the water tank
should be emptied. Otherwise,
freezing water may cause the
water tank to freeze and crack.
Water tank

3.12.6. Document Box

You may store your non-valuable docu-
mentation in the round or square type
document box.
You can turn the cover of the round type
document box counterclockwise and
open the document box.
You may lift the pin of the square type
document box and remove the pin. The
cover of the square type document box
may be opened.
Keep the locking pin and the
document box door neatly.

3.12.7. Fuel Tank

A diesel tank in various volumes such as
60-80 liters, which supplies the heater
unit, is optionally offered in your vehicle.
The filler neck is usually located on the
left side of the vehicle. After the fuel tank
cap is unlocked, you can open the fuel
tank cap by turning it counterclockwise.
In cases where the heater or the fuel
tank is installed by the customer, there
may be two red and black hoses on the
front panel of the vehicle. These hoses
are placed to make the heater unit - fuel
tank connections. These connections
should be made at fuel tank or heater
unit services.
It is necessary to pay attention
to the legal regulations during
the use of the fuel tank. In ca-
se of leakage, you should act
in accordance with the legisla-
tion of the country you are in.

3.12.8. Armature Box

The armature box is a cabinet containing
filling-discharging couplings, filling con-
trols, additional operating controls as
well as some hoses and accessories.
Filling-discharging operations of the tank
are carried out thanks to the equipments
in this cabinet. Filling-discharging can be
done automatically by means of the con-
trols inside this cabinet. The elements

Advertisement

Table of Contents
loading

Table of Contents