Programming Channels; Programming By Manual Entry - Uniden SC150B User Manual

Before you can scan, you must program the channels
within a bank. You can store one frequency per channel, up
to 100 channels.
Save the first 10 channels for sporting events. When you
program the appropriate frequencies for an event into these
channels, you can use DIRECT CHANNEL SCAN and
DIRECT CHANNEL ACCESS to quickly monitor the
activities.
Note: If
unlock the keypad by pressing and holding
disappears.
There are two ways to program a channel:
n
Manually select a channel and frequency, using the
numeric keypad. You can determine the frequencies you
want from the Betty Bearcat (or similar) Frequency Book
(optional), or from the Sports Activity Frequency Book
(included).
n
Search a band to find an active frequency, and then
directly store it into the next available channel
A. Programming By Manual Entry
1. Select a frequency from the appropriate Frequency
Directory.
Example:
2. Make sure the scanner is in the SCAN Mode. If it is
in the SRCH Mode, press
3. Make sure the scanner is in the BANK Mode. If it is
in the DIRECT Mode, press
4. Press
5. Press
6. Enter the frequency number using the numeric
keypad. (Be sure to include the decimal point.)
If you make a mistake and want to clear the entry,
press

Programming Channels

appears on the display (keypad locked),
Program 125.2500 MHz into Channel 18.
H
to stop scanning.
1 8 H
1 2 5 . 2 5
.
twice and re-enter the frequency.
S
.
B
.
to go to Channel 18.
14
until
.