Programming Channels; Erasing A Stored Frequency - Uniden UBC75XLT Owner's Manual

•

Programming Channels

To store desired frequencies in the selected channel:
1.
2.
3.
4.
Note: If you entered a frequency that has already been entered
elsewhere, the scanner sounds an error tone and displays the
channel that was duplicated. If you entered the frequency by
mistake, press .Clr twice to clear the frequency and enter a
diff erent one. To enter the frequency anyway, press E to accept.

Erasing a Stored Frequency

1.
2.
UBC75XLT_UB372BV_20130401.indd 35 UBC75XLT_UB372BV_20130401.indd 35
If you entered a frequency that has already been entered
elsewhere, the scanner sounds an error tone and displays the
channel that was duplicated. If you entered the frequency by
mistake, press .Clr twice to clear the frequency and enter a
diff erent one. To enter the frequency anyway, press E to accept.
From Scan mode, press
PGM
Func + Pgm.
Turn the scroll control knob to
choose the channel.
Input the frequency, and press E. The scanner is now on
that frequency, on Hold with the
Delay function automatically
turned on (see page 44).
Press L/O, exit program mode and return to Scanning
mode.
Find the frequency you want to erase. Press Hold.
Press Func + Pgm.
appears.
35
2013/04/02 11:08:36 2013/04/02 11:08:36