Maintenance - Craftsman CMCPS520 Instruction Manual

20v max 2‑in‑1 powered scrubber
Table of Contents

Advertisement

Available languages

Available languages

ENgliSh
Operating
Because this scrubber is powerful, you do not need to apply
excessive pressure while operating.
The scrubber works best with a wet and soapy surface. The
surface may be first sprayed or soaked with water, and/or
detergent, or the scrubber may be dunked into a bucket of
detergent that is diluted to the recommended amount on its
product label.
Use with no extensions for lower and contoured surfaces.
Use with the extension pole
Extend the extension pole for extra‑long‑reach
applications.
Proper Hand Position (Fig. J)
Always be sure your footing and grip are firm before turning
the scrubber on.
1. When using just the power head
scrubber by the base handle
2. When using the upper pole
or pole handle
12
13
handle with the other hand.
On/Off Switch (Fig. K)
To avoid splatter from a brush
the attachment is still in contact with the surface.
To turn the scrubber on, press the (I) side of the
on/off button
.
20
To turn the scrubber off, press the (O) side of the
on/off button.

MAINTENANCE


WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can cause injury.
Your CRAFTSMAN power tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Power Scrubber Cleaning and Storage
NOTE: Thoroughly clean the brushes before and after each
use, and inspect for trapped debris and wear. Replace brush if
the bristles are beginning to show signs of wear or if debris in
brush cannot be removed.
1. Clean the brushes in a mild detergent, rinse with water
and air dry.
2. To clean the scrubber, wipe with a damp sponge or cloth
and a mild soap.
3. Store the scrubber and attachments/accessories indoors.
important: However, should the unit accidentally fall into
water without the connections or battery cover tightly in
place, shake out loose liquid and allow to air dry overnight
while disassembled.
4. Do not store the tool on or adjacent to fertilizers
or chemicals.
10
for higher surfaces.
10
and base
, hold the
3
5
with one hand.
11
, hold either the pole grip
4
with one hand and the base
, turn the scrubber off while
8
VersaTrack™ (Fig. L)

WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can cause injury.

WARNING: To reduce the risk of serious personal injury,
do not use a damaged VersaTrack™ hang hook or
VersaTrack™ Trackwall. A damaged VersaTrack™ hang
hook or VersaTrack™ Trackwall will not support the
weight of the tool.

WARNING: To reduce the risk of serious personal injury,
ensure the screw holding the VersaTrack™ hang hook is
securely tightened.

WARNING: To reduce the risk of serious personal
injury, DO NOT suspend tool overhead or suspend
objects from the hang hook. ONLY suspend tool on the
VersaTrack™ Trackwall using the hang hook.

WARNING: The VersaTrack™ hang hook is not a
belt hook.

WARNING: Ensure that the tool weight does not
exceed the maximum rated weight of 20 lb (9 kg) for
the selected VersaTrack™ hook.

WARNING: When hanging objects on a VersaTrack™
Trackwall rail, adequately space the tools in order to not
exceed 75 lb (35 kg) per linear foot.
NOTE: VersaTrack™ accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN, call 1‑888‑331‑4569.
Service
Tool service must be performed only by qualified
repair personnel. Service or maintenance performed by
unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical
replacement parts. Follow instructions in the
Maintenance section of this manual. Use of
unauthorized parts or failure to follow Maintenance
Instructions may create a risk of electric shock or injury.
Store in a safe location with battery removed, and out of
reach of children.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cmcps520bCmcps520d1

Table of Contents