Editing (Ccrs) - Kenwood DP-2060 Instruction Manual

Editing (CCRS)
This function is for editing when you are recording the
contents of a CD onto a tape.
It is to ensure that the final track on each side of the tape
is fully recorded and that the possible recording time on
the tape will be fully used.
Open/Close key
(IS)
EDIT
Operate in the stop mode.
1 Select the EDIT mode.
• Proceed to the step 2 while the[EDIT|indicator is lighted,
2 While thelEPITlindicator is lighted, input the two-way recording time of the tape.
12 3 4 5
ir : I I . I I I I I i l
B -7 S S O
• Recording within 99 minutes can be specified in
minutes (2 digits).
The CD contents are edited as follows.
1 The input tape recording time is divided by two, and tracks that
can be accommodated in file A (which refers to tracks on tape
side A) are selected in order of their track Nos.
2 In a few seconds, the time left on tape side A is displayed, then
file B (tracks on tape side B) is edited in the same manner.
• Editing will be interrupted if the[¥] or @ key is pressed during
editing.
Completion of editing
Blinks-
Stops blinking
ISSa EOT T<2r„. _ Tl^^= i B -r O B
E
U 1
.1.
Total time of selected uacks.-1 Track Nos. selected from disc |
Recording edited data
Connecting the CO player via a system control cable to a KENWOOD cassette deck with an "IT6J,rXS8r designation will enable "CCRS
recording".
1 For details, see "How to Record CD" in the instruction manual of the cassette deck.
J
During editing
iPcaMi .
_IT
n_n'
/ f
u
EDIT indicator Blinks
Remaining time in file A
i
(ms
b
-G
Remaining time in file B
Example
ForC-46 :[TlO][IlSCl!S[±IBE'
ForC-30 :iol
• When the EDIT operation is carried out after a designated tune
is programmed, the programmed tune is given priority and then
other tunes are added to the program in the order of their track
numbers according to the amount of time remaining.
[EDITiindicator lights up.
14
DP-2OBD/DP-101