Programmed Playback (Pgm Mode).12 - Kenwood DP-2060 Instruction Manual

Programmed playback (PGM mode)
Up to 20 tunes can be programmed in the desired order and can be played.
■ Playing desired tracks in desired order (PGM mode)
'I Enter the PGM mode. | | To check the programmed contents
Press the | PROGRAM MODE| key.
I 1
IPGMI indicator lights up.
The SINGLE TIME display .changes to
TOTAL TIME display.
2 Program desired tracks in desired order.
rP.C.I indicator lights up.
■
1
» Every time the lOHECKi key is pressed, the track No. and the
contents which were programmed (P-No.) are displayed in the
order off programming.
» The previous display will resume in a few seconds.
To resume normal playback
Example —
To program track Nos. 2, 5 and 25:
l2lli M E32SI
The number of tiie
I selected track in the
program {P-No.> is
J displayed for a few
seconds.
I The total time of
the selected track
I
will be displayed.
» Up to 20 tracks can be programmed. FULL is displayed if
you attempt to program the 21 at track.
» If you made a mistake, press theICLEARI key and select the
correct track.
• Tracks can be also programmed by reading the disc label
while the disc tray is open.
• The time information is not displayed if a track No. of 44 or
more is programmed.
iPGMl indicator goes off.
• The playback in the order of the track Nos. on CD will start after
the track which is being played.
To stop programmed playback
Start playback.
• Tracks are played in the order they are programmed (P-No.).
• If one of the skip keys (|»»H|or|T^] is pressed during
programmed playback, the track being played is skipped in
the forward or reverse direction.