Configuring The Reception Method Of A Channel (Channel Type) - Kenwood NXR-1700 Function Reference

4 TRANSMISSION/ RECEPTION/ REPEAT / 4.5 Configuring the Reception Method of a Channel (Channel Type)
PTT Priority is the priority order of these transmission methods. Multiple factors for transmission may overlap when
the repeater is operated. In these cases, by switching to the signaling and modulated signal line that match a
prioritized PTT, the repeater can switch to the PTT having higher priority when the repeater is transmitting using a PTT
having lower priority.
If a PTT having the higher priority is activated while the repeater is transmitting using a PTT having the lower priority,
the repeater switches to the signaling and modulation signal line configured for the PTT having higher priority.
PTT
Test PTT
External PTT
Repeat PTT
Console PTT
Network PTT
SIP PTT
Configuration using KPG-D7
Configuring PTT Priority ( Edit > Optional Features > Common Page 1 > PTT Priority)
・

Configuring the Reception Method of a Channel (Channel Type)

4.5
Channel Type is the reception type for each channel. The repeater can be configured to wait to receive either an
analog signal or a digital signal, or both types of signals.
Configuration
Analog
DMR
NXDN
Mixed
Configuration using KPG-D7
Configuring Channel Type ( Edit > Channel Information > Channel Edit > Channel Type)
・
Configuring Ch Type (Channel Type) ( Edit > Channel Information > Ch Type)
・
FUNC (E)/ Ver 2.00
Table 4-4 PTT Priority
Modulation Signal Line
Local Mic
TX Audio input
Received audio
Received audio (IP network)
Received audio (IP network)
Received audio (IP network)
Table 4-5 Channel Type
Description
The repeater receives an analog signal.
The repeater receives a DMR digital signal.
The repeater receives an NXDN digital signal.
The repeater receives both analog and digital signals.
80