Writing The Configuration Data To The Repeater - Kenwood NXR-1700 Function Reference

2 GETTING STARTED / 2.2 Writing the Configuration Data to the Repeater

Writing the Configuration Data to the Repeater

2.2
Configuration items using the FPU
The repeater can read data from and write data to the FPU via the IP.
The following items can be configured by using the FPU:
・Channel Information
・Optional Feature
・Protocol Options
・Function Port
・Multiple Encode/Decode List
・User List
・Console List
・Conventional IP Network
・Site Group Table
・Test Frequency
・Embedded Message
・Embedded Message with Password
・IP Interface
・Voice Logger List
・SIP Phone
・SNMP Settings
Note
・ User List and Console List can also be configured from the Web Tool. However, only overwriting can be performed
from the Web Tool for the User List and Console List data configured by using the FPU.
Configuration items using the Web Tool
The repeater supports the configuration of the IP address by using the Web Tool (configurable only by using the Web
Tool).
The following items can be configured by using the Web Tool:
・User List
・Console List
・Time Setting
・Own IP Setting
・QoS
・Hot Standby
・Security
・Format
・Timer
・Administrator
FUNC (E)/ Ver 2.00
53