Table of Contents
Advertisement
a video tape
If you sonnect the unit to another VCR or Camcorder, you can
clap}bate a previously
recorded tape. Make aII connectkms
befora
tumi_g on the power.
TV/VCR
®
il
iI
,
3
_Preparation:
• Press TV/VCR to select the T'V/VCR mode.
• Load a cassette tape with the erase prevention tab
intact.
• Load a previously recorded tape into the playback
VCR or Camcorder.
Press SP/SLP to select the desired tape speed
SP or SLP,
SP/SLP
RETURN
It is recommended that you set the
Speed to the SP mode on the
recording VCR for best results.
2
Press iNPUT SELECT once or twice to select
AUDIO/VIDEO input position.
"LINE1" or "LINE2" will appear on the
INPUT
screen.
S_LECT
zO0_
LiNEr: on the rear panel
LINE2: on the _ront panel
Press both REC at the same time, then press
PAUSE/STILL
FORE
C _
*PASSFJ_T&L
Press PLAY on the playback
VCR, then press
PAUSE/STILL
Release
the recording
pause and the playback,
Note:
Unauthorized recording of oopydghted television programs, _rns,
video cassettes
and other materials may infringe the rights of
copyright owners and be contrary to copyright laws.
Connection
with second
video recorder
• Select "LINE1"
on step 2
PlaybackVCR
To WDEOOUT _
TOAUDIO _ a_ OUT
[
Audi°/Vidg°£_'ble(n°_'_appl_ed_
T
_TOAUDLO(L) OUT
Recording VCE
--
To VIDEO Itx
To AUDIO (L) IN
_'To AUDIO (R) _N
Connection
with Camoorder
• Select "LINE2"
on step 2,
PlaybackCamcorder
To AV Jack
Illustration of
MW2OFN1/R
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer's
instructions. A typical cameorder dubbing hookup is
shown above.
0
471
Advertisement
Table of Contents
