Power Source - Kenwood DPC-92 Instruction Manual

i Wireless Remote Control Unit <Fig. 3>
®@ Buttons marked with an asterisk (*) will perform the same function as those on the player.
Buttons without an asterisk are buttons only on the remote control.
@ This remote control is not fitted with a player power button.
@ Before use, pull out and remove battery preserver sheet located at the rear panel.
® Replacement batteries for the remote control are available at retail stores. Ask for CR 2025
type batteries.
@ [H.MASTER] HIT MASTER button
© »* [GENRE] button
© * [REPEAT] button
@ [P.MODE/EDIT] PROGRAM/EDIT
button
@© * [PP] button
@ * [4] button
@® Direct music selection button (0 ~ 9)
(@® Direct music selection button (+ 10)
@ * [M1] STOP button
@ * [> II] PLAY/PAUSE button
«k) * [VOL.] Volume UP/DOWN button
@ * [SCENE] Select button
@ Remote Control Unit Operating Range
@ The diagram below indicates the operating range of this remote control unit.
Caution:
@ Allow at least one second between pressing keys when
using the remote control.
@ When the compact disc player is placed in direct sun-
light the user may experience difficulty using the remote
control.
Power source
@ Use in the following method:
Household AC Power
Source
Use the provided AC adaptor.
Alkaline dry Battery
Use size AA alkaline dry batteries which are available in the general
market.
Rechargeable Battery
(Provided)
Charge with the provided AC adaptor before use.
Car Battery
8 ppc-92
Use the optional car-battery adaptor DC-C6 (exclusive for 12-V car).