Firmware Version Display; Factory Reset; Font Settings - Shanling UA4 Quick Start Manual

Left/Right Button
• Single Press: Previous / Next track.
• Long Press: Fast Forward / Rewind.
(Needs to be supported by Playback software and Connected Device)
Note: In UAC 1.0, buttons work in DAC Volume Mode. In UAC 2.0, button
functions depend on the connected device and chosen Key Mode.

Firmware Version Display

In "DAC Volume" mode, press the left or right button to bring up the
volume level display and then press both the left and right buttons at
the same time. It will display the currently installed Firmware version.

Factory reset

Press and hold both the left and right buttons for 5 seconds to perform
factory reset of the device. Display should show "Factory Reset...".

Font Settings

8 different fonts are available in the settings menu. Access the Settings
menu, move to "Set Font" and use the left or right button to cycle
between available fonts.
/ ( Track Up/Down Mode) " "