Bissell LITTLE GREEN PROHEAT 5207 Series User Manual

Hide thumbs Also See for LITTLE GREEN PROHEAT 5207 Series:

User manual (13 pages)

Table Of Contents

Table of Contents

Quick Links

LITTLE GREEN

PROHEAT

_______________

USER GUIDE

5207 SERIES

Need help?

Do you have a question about the LITTLE GREEN PROHEAT 5207 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Bissell LITTLE GREEN PROHEAT 5207 Series

Page 1 LITTLE GREEN ® PROHEAT ® _______________ USER GUIDE 5207 SERIES More of a video person? Look for this icon and go online for an instructional how-to video at www.BISSELL.ca/ videos...
Page 2: Safety Instructions
» Use only BISSELL cleaning » Do not use for any purpose other products intended for use with » Keep hair, loose clothing, fingers, than described in this User’s...
Page 3: Table Of Contents
Thanks for buying a BISSELL portable carpet cleaner! We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your portable carpet cleaner works as well in two years as it does today, so this guide has tips on using (pages 6-11), maintaining (pages 11-13), and if there is a problem, troubleshooting (page 14).
Page 4: Product View
2. Power Button 10. HydroRinse™ Self Cleaning Hose Tool 3. Dirty Water Tank 11. 3-N-1 Stair Tool* 4. Flex Hose *select Models only 5. Flex Hose Clip 6. Power Cord 7. Quick Release Cord Wrap 8. Hose Grip Bracket www.BISSELL.ca...
Page 5: Cleaning Formula
Cleaning Formula WARNING To reduce the risk of ﬁ re and electric shock due to internal component damage, use only BISSELL cleaning formula intended for use with this machine. Use Professional formula for optimal Keep plenty of genuine BISSELL cleaning results! Spot &...
Page 6: Operations
Then wrap the flex hose around the unit Wrap the power cord around the and snap hose grip into bracket. cord wrap. www.BISSELL.ca...
Page 7 FORMULA Add water to the indicated fill line on Add BISSELL formula to the indicated fill the solution tank. line on the solution tank. NOTE: Follow the ﬁ ll lines on your clean tank to add the correct amount of hot tap water (140 degrees F)/ 60 degrees C) MAX) and portable machine formula.
Page 8 Hold the 3” tough stain tool just above the carpet or upholstery to be cleaned. Let cleaning solution set for 5 minutes Press the trigger to mist solution over before cleaning. the soiled area. www.BISSELL.ca...
Page 9 Set the tool directly on top of the carpet before pulling the spray trigger to inject formula deep into the carpet fibers. Always keep the tool in direct contact with carpeting to avoid over- spraying. NOTE: Ensure that the cleaning solution and water are in the tank before use. www.BISSELL.ca...
Page 10 Turn the tank to lock it into place. CLEANING THE STAIN TRAPPER TOOL: Clean the front of the tool by removing the plate over the suction plate. Pull down to remove and rinse with water. Then replace the plate by sliding back into place. www.BISSELL.ca...
Page 11: Maintenance & Care
NOTE: Store unit in protected, dry area, at room temperature (40 degrees F to 110 degrees F). NOTICE To reduce the risk of a leaking condition, do not store unit where freezing may occur. Damage to internal components may result. www.BISSELL.ca...
Page 12 Return the float stack to the dirty tank. Ensure float is installed before returning the float stack to the dirty tank. Turn the float stack clockwise to lock. Ensure the arrow on the float stack lines up with the lock icon. www.BISSELL.ca...
Page 13 Check the float stack for clogs and automatically reset and cleaning may remove debris. continue once plugged back in. NOTE: If the thermal protector continues to activate after following the above steps, your cleaner may need servicing. Call BISSELL Consumer Care or visit the website. www.BISSELL.ca...
Page 14: Troubleshooting
Lift tool and point upwards to allow water in won’t pick hose to flow into the dirty water tank. up cleaning Incorrect cleaning formula. Use BISSELL Portable Machine formulas solution only. Dirty tank is improperly seated Remove dirty tank and reseat onto unit.
Page 15: Warranty
Clean the duckbill valve that is located at If your BISSELL product should require service: the bottom of the dirty water tank. Once Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. cleaned, make sure it is placed securely back in place.
Page 16: Product Registration
NOTE: Please keep your original sales receipt. It provides proof of purchase date in the event of a warranty claim. See the Warranty page for details. For cleaning tips and more visit www.BISSELL.ca or ﬁ nd us at: BISSELL BISSELLClean...