Philips 3000 Manual page 11

8 Press the on/off button on the base again to turn off the product.
Using your Power Flosser
1 Make sure that the pause switch on the handle is in the 'off' position.
2 Press the on/off button on the base to turn on the product.
3 Place the nozzle tip in your mouth. Lean over the sink and partially close
your lips over the nozzle to avoid splashing. Leave enough space to allow
water to flow from your mouth into the sink.
Standard and Comfort Nozzle
With the base station turned on:
a Position the nozzle tip just above the gum line at a 90° angle.
90°
b Slide the pause switch on the handle to the 'on' position to start the
water flow.
90°
English 11