Sony VPL-SW620 Operating Instructions Manual page 46

3
Follow the on-screen instructions to install the software.
To uninstall Interactive Presentation Utility 2, click [Start]-[All Programs]-[Interactive
Presentation Utility 2]-[Uninstall].
Setting Interactive Presentation Utility 2
1
Connect the projector and computer with the computer cables and a USB cable
(page 45), and project the image with the projector.
For details on the connecting computer cables (Mini D-sub 15-pin cable or HDMI cable)
for image signals (VGA), see page 9.
2
Set "Whiteboard Data" to "Retrieve to computer" in "Interactive." (VPL-SW635C
only)
3
In "Assign Type B USB" (page 26), select the same input terminal as the one selected
in "Input" (a menu for switching input signals) on the screen (page 14) to select the
image for using Interactive Presentation Utility 2. (VPL-SW635C only)
The settings of each item for using Interactive Presentation Utility 2 are the following two
methods (a and b).
PC Free Whiteboard
Interactive
a On Retrieve to
computer
b Off Retrieve to
computer
4
Start Interactive Presentation Utility 2.
To start Interactive Presentation Utility 2, click [Start]-[All Programs]-[Interactive Presentation
Utility 2]-[Interactive Presentation Utility 2].
After the application starts, the icon appears in the taskbar, and the toolbar appears on the
screen.
46
Using Interactive Presentation Utility 2 (VPL-SW635C/SW630C/SW620C only)
Selected input terminal on
"Input" (menu for
Data
switching input signal)
"Input-A," "Input-B,"
"Input-C," "Type USB B,"
or "Network"
"Input-A," "Input-B,"
"Input-C," "Type USB B,"
or "Network"
Assign Type B USB
Same as the input Activating
terminal selected on
the left
Same as the input Activating
terminal selected on
the left
Interactive
Presentation
Utility 2