Sony VPL-SW620 Operating Instructions Manual page 27

*3: Before performing the calibration, the message "Do you wish to start calibration?" will be
displayed. If you select "Yes", the projector performs the calibration.
*4: If you already have started the Interactive Presentation Utility 2 on the computer, perform the
calibration of Interactive Presentation Utility 2.
*5: If you display the menu or the warning/caution messages etc., are displayed during the
calibration, calibration will stop. In addition, if you stop operating the calibration for more than
20 seconds, the manual calibration will also stop.
*6: When you display the menu while using the PC Free Interactive function, the PC Free Interactive
function cannot be used for a while and the toolbars and drawing data will not be displayed. If
you hide the menu, you can use the PC Free Interactive function again. If warning or notification
messages etc. appear, you cannot use the PC Free Interactive function. For the settings of PC
Free Interactive, see page 50.
*7: If you select "Save to projector" when you are accessing the whiteboard data in the projector,
the files may be damaged. Do not operate while you are accessing the whiteboard data.
*8: If "Retrieve to computer" is selected, you cannot save the whiteboard data to the projector even
if the computer and the projector are connected with the USB cable.
*9: Images may not be projected properly depending on the operating environment or the
application. Use Input-A, Input-B, or Input-C to project the images properly.
The Function Menu
27