JVC AV-27D303 User Manual page 13

Hide thumbs Also See for AV-27D303:
Table of Contents

Advertisement

Step Three -The Plug In Menu
When you turn your television on for the first time the Plug In Menu will appear. This menu sets
some of the basic settings for your television. A complete description of the Plug In Menu can
be found starting on page 25. We recommend you complete the Plug In Menu items before you
start using your television. But to begin watching your television right away you only need to run
the Auto Tuner Setup. This lets your television learn the channels it is able to receive. To run the
Auto Tuner Setup follow the steps below.
INTERACTIVE
PLUG
IN
MENU>
AUTO
TUNER
SETUP
TUNER
MODE
<CABLE,
QSTART
SELECT
BY_Q
OPERATE
BY[][]
EXIT
BY I=J_ITa
Press the •
button to move to AUTO TUNER
SETUP
<11_ To choose
CABLE (if you are connected
to a cable system)
or AIR (if you use
an antenna)
or SKIP (if you need to)
To move to START
The Auto Tuner will now memorize
all of the clear, active channels
your television
can
receive. This will take one or two minutes.
The Auto Tuner is finished when the message PROGRAMMING
OVER! appears onscreen.
Your Quick Setup is now complete. You can now begin watching your television, or you can
continue on in this guide for more information on connecting audio/video devices, programming
your remote control, or using the JVC onscreen menu system to customize your television
viewing experience.
The Quick Setup is complete
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Av-27d203Av-20d303Av-27330Av-27320Av-27s33

Table of Contents