Table of Contents
Advertisement
CA-MX5S5MBK
If you use the Remote Controller, press the CD CHANGER button, and
specify the Disc No. with numeric keys 1 fo 6.
cacach
GIGI CI
*
The discs are played in order from the first track on the CD with the
selected disc No. to the last track on Disc No. 6.
CD CHANGER
Notes:
*
Ifthere is no CD on the disc tray or the disc No. with disc tray specified,
the CD on the next disc tray will be played.
;
*
Thedisc No. indicators go off if there is no CD on the disc tray and there
is no disc tray. You cannot select any disc No. if the corresponding
indicator is off.
Selecting a Track to Play
Cc.
Td
hutton
Scanning through track numbers (AUTO SEARCH)
Each time the kt button is pressed, the track moves backward by one
number.
Each time the Pt
button is pressed, the track moves forward by one
number.
¢
Ifyoupressthe K€ or PPI button continuously while the CD Automatic
Changer is in the stop mode, the track number will continue to move in
the selected direction.
*
Ifyou press the #4 or PPI buttons while the CD Automatic Changer is
in the pause mode, you will find the original track you selected. You can
restart playback by pressing the PLAY/PAUSE button.
Searching for a specific part of a track
(MANUAL SEARCH)
if you hold down the #4 button while the CD Automatic Changer is playing
or has paused, fast rewinding will occur.
Ifyou holddown the PP button while the CD Automatic Changer is playing
or has paused, fast forwarding will occur.
Notes:
*
When the track number selected on a certain disc does not exist, play
starts from the final selection on that disc.
«
|fthere isno CD on the disc tray or you specify a track with the disc No.
without a disc tray, the display Disc No. indicator will go off, and the CD
on the next disc tray will be played.
Using the Remote Controller to Select a
Track
There are two ways to search for a track with the remote cotroller:
Numeric keypad
1
2
3
Ooo
en
AUTO SEARCH buttons i or PP
Using the Numeric Keypad
1. Press the CD 10KEY button on the Remote Controller.
2. Enter the track's number with the numeric keys.
¢
Ifthe track you want to hear is the 8th track. press the 8 key.
*
Ifthe track you want to hear is the 15th track, press the +10 key and the
5 key.
;
ifthe track you want to hear is the 20th track, press the +10 key and the
10 key.
Using the Auto Search Buttons
Press the Auto Search #4 or BRI button on the Remote Controller to scan
through the track numbers.
Note:
¢
You cannot search manualy by holding down the €¢€ or PI button on
the Remote Controller.
Listening Repeatedly
Using the REPEAT button.
REPEAT
Cc
Each time you press the REPEAT button, the mode will change in the
following order:
~> REPEAT — REPEAT 1 -> OFF- (back to the beginning)
REPEAT
if all discs in the CD Automatic Changer and the last track are played,
playing will be repeated from the first disc.
It will keep repeating until you cancel the repetition.
*
If you select the REPEAT mode in the PROGRAM mode, all the
programmed tracks will be played, and they will be repeated in the order
programmed.
REPEAT 1
The current track will play to the end and then start over again. It will keep
repeating until you cancel the repetition.
¢
Ifyouselect the REPEAT 1 mode in the PROGRAM mode, the selected
track will be played repeatedly.
Canceiling Repetition.
Press the REPEAT button and turn the REPEAT indicator off.
Each track will play till the end without repeating.
INTRO play
This function is useful to search for a disc or track in the CD Automatic
Changer.
1. Press the STOP/CANCEL button on the CD Automatic Changer or
Stop button on the Remote controller.
:
2. Press the PLAY MODE button on the CD Automatic Changer or
Remote Controller, and select the CONTINUOUS mode.
The CONTINUE indicator lights.
PLAY MODE
3. Press the CD Automatic Changer INTRO button and select the
desired mode.
'
Each time you press the INTRO button, the mode changes in the
following order:
— DISC INTRO ~* INTRO — OFF-> (back to the beginning)
11
(No. 20342) 13
Advertisement
Table of Contents
