Table of Contents
Advertisement
| CA-MX55MBK
Using the Power Switch
Adjusting the Volume controls
Volume
Turn the VOLUME knob to adjust the volume level of the speakers or
headphones.
Balance
Turn the BALANCE. knob to adjust the left-and-right sound balance in the
speakers or headphones.
Bass Control
Using the SEA Graphic Equalizer
=10
@3Hz 280Hz tkHz dkHz
16xHz
Selecting the Source
button.
SOURCE SELECTOR
Using Turntable, VCR and DAT
In addition to the CD Automatic Changer, Tuner, and Cassette Tape Deck,
the amplifier can also play a turntable, a VCR and a DAT.
1. Turn the power for each piece of component ON.
2. To play a record, press the SOURCE SELECTOR button on the
amplifier so that PHONO lights on the SOURCE Indicator.
To use VCR or DAT, press the SOURCE SELECTOR button on the
amplifier so that VIDEO/AUX lights on the SOURCE indicator.
3. To operate the each component, refer to Its instruction manual.
*
You can operate a JVC VCR using the remote controller.
When VCR is connected, the sound is heard through the speakers.
Signal Level Indicator
The Signal Level Indicator shows the signal level of each frequency band
separately.
Remote Sensor
Receives the signal from the supplied Remote Control unit.
REMOTE SENSOR
9
(No. 20342) 11
Advertisement
Table of Contents
