Advertisement
Item Description
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
(not including external electrical cables and cords,
PCBs or PCAs already listed as a separate item
above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner.
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
Components containing chlorofluorocarbons (CFC),
hydrochlorofluorocarbons (HCFC) or
hydrofluorocarbons (HFC), hydrocarbons (HC)
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components and
materials requiring selective treatment can be removed.
Tool Description
Screwdriver
Screwdriver
Heatgun
Suction cup
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment
including the required steps to remove the external enclosure.
EL-MF877-00
Template Revision D
last updated May-2022
HP Inc. instructions for this template are available at
Components and parts requiring selective
treatments
☐ Power Supply capacitor(s) or condenser(s)
☒ AC power cord
☐ Audio, video or data cables
☐ Other: _________
EL-MF877-01
Quantity of
items
included
in product
0
0
0
1
0
0
0
0
0
0
0
Tool Size (if
applicable)
PH0X50 screw
driver
T15 screw
driver
N/A
N/A
Page 2
Advertisement
