Table of Contents
Advertisement
Press the ON/STANDBY (POWER /1/ )key.
POWER
aN
BON OSTANDBY
CD-206/204/203/DPF-RB010/R4010/R3010
(En)
Hereafter the illustration of the common
parts
on the front panet is of CD-206/DPF-R6010.
fl Load/unload a disc.
@ Open the tray.
=
4A
@Place/remove a disc.
Label side ao
an
| =SS —
Disc tray
© When loading or unloading other discs
N Disc Skip. E
@Do not touch the played side of disc.
@ Loading two discs together will cause malfunctioning.
Place the disc properly along the groove on the tray. (If the disc is not
placed horizontally, malfunction will result.)
@A single CD (8 cm disc} can also be played.
@ Ordinary CD single (8 cm) disc adapters sold in audio stores cannot be
used with this unit
@When
loading/unloading a disc while the tray rotates, a malfunction
might occur. Load/unload the disc when the tray does not rotate.
CD-206/DPF-R6010
pst?
oisc2
AIIDISC indicators * <=
ight regardless of how many discs are present.
CD-204/203/DPF-R4010/R3010
All DISC indicators * 0 * light regardless of how many discs are present.
ALL TEXT SEARCH (CD-206/DPF-R6010 only)
Remote contro! unit only
For most CD-TEXT discs, it is convenient to read the complete disc information into the CD player before playing the disc.
This allows text information such as TITLE SEARCH, TEXT DISPLAY, ALL INFO., and other messages to be displayed faster.
After loading all the discs, operate in stop mode.
ALL TEXT
SEARCH
@ The information read into the CD player is cleared when
the tray is opened. Therefore, perform this operation
again if the tray was opened
Search in progress or reading information
Blinks.
When the disc is CD-TEXT
appear for approx. 3 seconds.
Advertisement
Table of Contents
