Table of Contents
Advertisement
Units are designed for operation as follows.
The AC voltage selector switch on the rear panel is set to the voltage
the CD-206/DPF-R6010.
that prevails in the area to which the unitis shipped.
Before connecting
the power cord to your AC outlet, make sure that the setting position
of this switch matches your line voltage.
If not, it must be set to your
voltage in accordance with the following direction
AC110-220V VI
Cacz2z0-z40v
~
Note
Our warranty does not cover damage caused by excessive line voltage
For the United Kingdom
Factory fitted moulded mains plug
IMPORTANT
Safet
WARNING
insure Safe operation.
<n
=
ay
PEERS
precauti ons
AX Caution : Read this section carefully to e
The marking of products using lasers
(Except for some areas)
CLASS 1
LASER PRODUCT
The marking is located on the rear panel and says that the compo-
nentuses laser beams that have been classified as Class 1. It means
that the unitis utilizing laser beams that are of a weaker class. There
is no danger of hazardous radiation outside the unit.
Lo
Advertisement
Table of Contents
