Advertisement
6 (O9€03"0N)
Front Panel
'Remote Control
ANT)
TWP
CABLE ViOEO
agTuAN
foun}
RECALL
Ghoice
Oo
Maun 'sar
fame}
PAGE-1
This. function enables storing up to 5 frequently-viewed chan-
nels as "CHOICE
channels",
allowing
immediate, direct ac-
cess to the channel of your choice using RECALL
CHOICE
button @ .
1) While in the channel select mode (either "CHANNEL"
or
"CABLE" mode), determine the channel you wish to preset
as a CHOICE channel and display it on the screen.
Noe example, press "0" and "9" to display "CHANNEL
09").
oa
2) With "PAGE-1" MENU displayed on the screen, press "1" of ©
40-Digit Keypad @ .
The display will show:
The "MENU" button selects a list of functions that can be pro-
grammed for operating the TV more conveniently. This func-
tion is possible only on the Remote Control.
@ Press MENU button @ on the Remote Control to display the
list of programmable convenience functions on the screen.
The "MENU" consists of 3 pages. Press the MENU
button
repeatedly to display the pages in the sequence below.
© Press numbers "1" through "9" on 10-Digit Keypad @ to
select the corresponding function in the numbered "MENU",
3) Press a number
(1 — 5) on 10-Digit Keypad
@
for the
CHOICE channel number you wish to preset. Then, the fol-
fowing display will appear.
{For example, press '1' for storing "CHANNEL 09" as the
"CHOICE
1" channel.}
-10—
ERANNEL QS 3. --
PRESS 170 FINISH
© \f you choose not to store call letters, press "2" of the 10-
Digit Keypad. The CHOICE LIST will appear to show that
the CHOICE PROGRAMING mode has been disengaged.
RECALL CHOICE Button
@ Simply press RECALL
CHOICE
button
@
anytime you
want to call up the list of preset CHOICE channels for con-
venient direct CHOICE channel selection.
While the list is on the screen, press the corresponding num-
ber of 10-Digit Keypad
@
(1 — 5) to select the preferred
channel.
2. CHANNEL
SCAN
This feature allows automatic
scanning,
in ascending order,
of the channels which
have been stored following the pro-
cedures of "9. INITIAL SET-UP" {described on page 19).
1) With "PAGE-1" MENU displayed on the screen, press "2" of
10-Digit Keypad @ .
@ All memorized channels {either "CHANNEL" or "CABLE"
mode)
will now
be scanned
sequentially
in ascending
order beginning with the channel that the TV is tuned to.
Scanning will stop automatically when the original chan-
nel is reached.
"SCAN
STOP"
appears
to show the
CHANNEL SCAN mode has finished.
CHANNEL-O2
ml »
CHANNEL-69
Eb
SCAN STOP
6]
ing each of the call letters to be stored. Avaiiable characters
include the alphanumeric characters
(26 English-language
letters and 10 numerals}, plus various punctuation marks
(period, comma,
etc.). Then, move the cursor to the next
letter position by pressing the FUNCTION
(-/+) buttons on
the Remote
Control. When
finished selecting up to 4 call
letters, press "1".
(For example,
if you
store the letters "JVC", keep the
FUNCTION
FORWARD
or BACK button pressed until the
letter "J'' appears. Then, press the FUNCTION (+) button to
move the cursor one letter position to the right. Press FUNC-
TION FORWARD
or BACK to select the letter "V", then
move the cursor to the right again with FUNCTION (+). In
the same way, select 'C", then press 1' to end the opera-
tion.)
The CHOICE LIST is displayed for a few seconds.
Repeat steps 1} through 5) to preset up to 5 CHOICE chan-
nels.
CHOICE
Ld
LEA
ABLE 8 30
2) Press any button on the Remote Control, if you wish to stop
scanning at a certain channel before the original channel is
reached.
To resume scanning, press MEMU
button
@ and then "2"
of 10-Digit Keypad
@ .
:
:
Notes:
@ When the TV is in the "CABLE" mode, the "CABLE" indi-
cation appears on the screen instead of "CHANNEL".
© For changing memorized channels, see "9. INITIAL SET-UP".
©
If you wish to start CHANNEL SCAN at a specific channel,
first select the broadcast mode (CHANNEL or CABLE} then
that channel number, and then follow instructions on the left.
® While actual CHANNEL SCAN is being performed, al! front
panel buttons become inoperable.
~-1-—
22>
<<
SN
rea
iw
Advertisement
