Advertisement
(o960S°ON)
OF
.Front Panel
ante
tye
CABLE VIOEO
wan,
nerurn "Sar
Oo
RECALL
Snore
fous)
=|
CY,
CHANNEL
-
+
3. SET-UP AV STATUS
Your TV set incorporates the AV STATUS memory that can
store 2 variations for preset picture/sound adjustments, allow-
ing you to change the picture/sound tone/speaker balance to
your preference, depending on each source.
1) With "PAGE-1" MENU displayed on the screen, press 3" of
10-Digit Keypad @ . The display will show:
2) Make
picture adjustments
to your
preference.
Use the
FUNCTION
BACK/FORWARD
buttons to select the item,
and use the FUNCTION (-/+) buttons to adjust each item. If
you also wish to make sound adjustments, press '1' to
advance the adjustment mode display. The following display
will appear, (Press ''1'' again to return to the picture adjust-
ment display.)
Bass,
W
TREBLE
W
eeL ANCE
i
3) Make sound adjustments to your preference. Use the FUNC-
TION
BACK/FORWARD
buttons to select the item, and
use the FUNCTION
(-/+) buttons to adjust each item. When
finished, press ''2''. The following display will appear.
4) Press "1" to store the setting as the "AV STATUS
A".
(Press "2" to store it as the "AV STATUS B".) Then the
picture
and
sound
adjustment
settings {items and their
reference scales) appear for a few seconds each.
TINT
COLOR
PICTURE
Bass
I
BRIGHT
TREBLE.
w
DETAIL
Il
BALANCE
ll
5) Repeat steps 1} through-4) for making another AV STATUS
setting.
Note: When you wish to choose the preset AV STATUS, just
press
the
AV
STATUS/RESET
button @ to choose
either set of AV STATUS
adjustments.
For details, see
"AV STATUS/RESET Button" on the next page.
~12—-
AV STATUS/RESET button
Use this button for choosing the preset AV STATUS or for
resetting the picture/sound adjustment items.
Press AV STATUS/RESET button @ onthe Remote Control.
The following display appears.
® Another pressing of the AV STATUS/RESET button resets
all previously adjusted items to their center positions,
1. AV STATUS A
Press "1" of 10-Digit Keypad @ for selecting AV STATUS A.
The picture and sound change as preset for "AV STATUS A".
Then the picture and sound adjustment settings (items and
their reference scales) appear for a few seconds each.
2. AV STATUS B
Press 2" for selecting AV STATUS B. The picture and sound
change as preset for "AV STATUS B"'. Then the picture and
sound adjustment settings {items and their reference scales)
appear for a few seconds each,
3. RESET
Press 3" when you wish to reset all adjusted items (TINT,
COLOR, PICTURE, BRIGHT, DETAIL, BASS, TREBLE
and BALANCE)
back to their center positions at the same
time. The on-screen displays appear and change as follows.
TINT
OUR
BASS
u
iC TURE
TREBLE
a
eignt
BALANCE
tl
DETAIL
Note: While in this mode, the setting of the AV STATUS can-
not be cancelled.
PAGE-2
The "SLEEP TIMER" feature allows you to turn off your TV
automatically at a preset time.
1) With "PAGE-2"
(or "PAGE-1"
or "PAGE-3")
MENU
dis-
played on the screen, press "4" of 10-Digit Keypad @ .
The display will show:
@ If the built-in clock has not been set to operate properly, the
SLEEP TIMER will not function. In this case, the following
display will appear on the screen to show that the clock re-
quires adjustment.
POUER INTERRUPTEO,
UOULD "TOU. SET CLOCK}
Press ''1'° (YES) of the 10-Digit Keypad to adjust the clock,
(1f "2" (NO) is pressed, the warning message "YOU CANNOT
OPERATE SLEEP TIMER! !" is displayed.)
Set the built-in clock. (See '6. SET CLOCK"' on page 15 for
details.) When the clock is adjusted, the message "THANK
YOU" appears. Then, the following display appears to show
that the SLEEP TIMER is now ready to be set.
2) Press the numbers on the 10-Digit Keypad to set the desired
switch-off time. The SLEEP TIMER can be set for up to 17
hours 59 minutes from the current time.
For example, if it is now 7:00 PM, and you want the TV to
switch off automatically at 9:00 PM, press "9", "0" and
"0".
(The ""AM/PM'
setting is done automatically.)
The
selected time of "9:00 PM" appears.
@ When you select "1" for hour setting (for example, "1:05
AM"), remember to press "0" first, then press "1", "O" and
nBir
3) To cancel the SLEEP TIMER setting, key in the current time
(the current time setting of the TV's built-in clock).
Notes:
© Jf an invalid time is selected (for example: '5:87"}, it will
be rejected and the SLEEP TIMER must be reset properly.
® While the SLEEP TIMER
is activated, if the POWER button
is pressed to turn the power off and on again, the SLEEP
TIMER will be cancelled. "
@ While the SLEEP TIMER is activated, if the power is discon-
nected (such as in the case of power failure,etc.) and reap-
plied later, the TV is turned off. When disconnected only for
a couple of minutes, the SLEEP TIMER
is reactivated; how-
ever, it turns the TV off later than the set time by the
amount of time of interruption.
@ The SLEEP TIMER may turn off the TV a little earlier than
the preset time.
© When
the remaining
time reaches 1 minute, the message,
"GOOD
NIGHT", will be displayed and continue to blink
until the power turns off automatically.
-1i3—
Advertisement
