Advertisement
20
is then re-
@ Insert the fine and micro-fine filters
and screw firmly into place.
@ Replace the coarse filter until it
clicks into place.
The dishwasher must not be used
without all the filters in place.
Cleaning
the filters in the water inlet
Two fillers are incorporated in the
water inlet to protect the solenoid
valve and filter out any impurities in
the water supply.
The filters must be cleaned when
dirty, otherwise insufficient water
flows into the wash cabinet.
One filter is located in the solenoid
valve and may only be cleaned or re-
placed by a trained engineer. As this
seldom needs to be done ~ if at all —
there is @ second easily accessible
filter in the threaded union of the water
inlet hose.
a
Zh
© Tum off the water valve
© Unscrew the inlet hose.
Wrap a cloth around the outlet to
soak up any excess water.
© Carefully remove the rubber seal
© Withdraw the filter, clean it, or ren-
ew if necessary.
© Replace filter and seal. Refit the
hose and turn on the watervalve to
test for leaks.
Advertisement
