Advertisement
12
Altering the amount of rinse aid Closing the door
dispensed
A fixed quantity of rinse aid (approx.
2ml, pre-set at the factory) is dis-
pensed automatically during the final
rinse.
Increase the amount of rinse aid if
droplets form on the dishes. Decrease
the amount if the dishes are smeared,
© Undo the screw cap,
@ The dispenser adjuster can be
seen at the bottom of the opening,
© Use a screwdriver to push the dis
penser adjuster in the required di-
rection. Itcan be adjusted between
1-6, i. e. between 1 to 6 ml. rinse
aid is dispensed per program.
@ Replace the screw cap securely.
To close the door, itt up until the lock
catches. The "Door release" button
should not be pressed when closing
the door as the lock will not catch and
the dishwasher cannot be switched
Advertisement
