Advertisement
Prepare and do servicing on the product
Figure 8
8. lf the choke lever was moved to the CLOSED posi-
tion to start the engine, gradually move it to the
OPEN position as the engine warms up.
F
CLOSED
Figure 9
3.2.3 To set the engine speed
After starting the engine, move the throttle lever (G)
to the FAST position for self-priming, and check pump
output. Pump output is controlled by adjusting engine
speed. Moving the throttle lever in the FAST direction
will increase pump output, and moving the throttle lever
in the SLOW direction will decrease pump output.
8 - English
Figure 10
3.2.4 To stop the product
To stop the engine in an emergency, simply turn the
ignition switch (H) to the OFF position. Under normal
conditions, use the following procedure.
1. Move the throttle lever (G) to the SLOW position.
OPEN
Figure 11
2. Turn the ignition switch (H) to the OFF position.
Figure 12
FAST
FAST
ON
OFF
G
SLOW
G
SLOW
H
Advertisement
