Repair instructions
6.13 Ignition coil air gap
6.13.1 To examine the air gap
1. Insert the thickness gauge (C) of proper thickness
between the ignition coil (A) and the (flywheel (B).
2. Ignition coil air gap should be 0.2-0.6 mm.
A
D
Figure 1
6.13.2 To adjust the Ignition coil air gap
1. Loosen the two bolts (D).
2. Insert the thickness gauge (C) of proper thickness
between the ignition coil (A) and the flywheel (B).
3. Push the ignition coil (A) firmly against the flywheel
(B) and tighten the ignition coil bolts (D) securely.
4. Remove the thickness gauge (C).
24 - English
C
B