Control Leds; Test The Network Connectivity - TP-Link Archer VX1800v User Manual

Chapter 17

17. 2. Control LEDs

The router's LEDs indicate router's activities and status. You can turn on or turn off the
LEDs either from the web management page or by pressing the LED button.
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set
for the router.
2. Go to Advanced >
3. Enable Night Mode.
4. Specify a time period in the
8. Click Save, and then the LEDs will be off during this period.

17. 3. Test the Network Connectivity

Diagnostics is used to test the connectivity between the router and the host or other
network devices.
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set
for the router.
2. Go to Advanced >
System Tools > LED
Night Mode Period
System Tools > Diagnostics.
Control.
as needed.
Administrate Your Network
115