TP-Link Archer VR400 Quick Installation Manual

Quick Installation Guide

AC1200 Wireless VDSL/ADSL Modem Router

Connect the Hardware

Configure the Modem Router
Enjoy the Internet
Phone Jack
VR400
1
DSL Splitter
PHONE MODEM
If you don't need the phone service, just directly
connect the modem router to the phone jack with
the provided phone cable, then follow steps 3 and
Phone (Optional) 4 to complete the hardware connection.
1
Connecting your computer to the modem router via a wired
or wireless connection
Wired
DSL LAN1 LAN2 LAN3 LAN4/WAN
Wireless
Connect wirelessly by using the SSID
(network name) and Wireless
Password printed on the product label
at the bottom of the modem router.
Now you can enjoy your Internet.
If you want more advanced settings, please refer to the User Guide on TP-LINK o cial website at www.tp-link.com.
DSL LAN1
2
Modem Router
Phone Cable
Ethernet Cable
LAN2 LAN3 LAN4/WAN
3
Push in to turn on the
modem router.
4
Verify that the following LEDs turn stable
before continuing with the con guration.
Power On DSL On
Note: The DSL LED takes about 1 to 2 minutes to stabilize.
2
Configuring the modem router via a web browser
A Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1.
Create a new password (1-15 characters) and click Save.
Note: If the login page does not appear, please refer to FAQ->Q1.
http://tplinkmodem.net
New Password
Low Middle High
Confirm Password
Save
B Enter the password you created and click Log in.
Note: For subsequent logins, you only need to enter the password that you have created.
C
Select your Region and Time Zone, then click Next. Follow the step-by-step
instructions of the Quick Setup to complete the initial con guration.
Power Adapter