Rain Readings | History - meteo SP89 Manual

mode.

Rain Readings | History

 In the main display interface, press and hold the "
rainfall or rate of rainfall
Note: Rainfall: from current to past (1 hour | 24 hours | day | 7 days | month | year | total) total accumulated rainfall
Rainfall rate: average rainfall over the past 12 hours per hour
 Press and release the "
Note: NOW: cumulative value over the past 30 minutes
HOUR: cumulative value over the past 60 minutes
24 HOURS: The cumulative value of the past 24 hours.
DAY: 24 hr period from 0:00 – 23:59(12:00am - 11:59pm). Cumulative value with today
7 DAYS: In the past 7 days, the cumulative value of the last record begins
MONTH: The cumulative value defined by the calendar month (ie January 1st - January 31st).
YEAR: The cumulative value is determined by the calendar year, from January 1 to December 31.
TOTAL: The cumulative value of the total run time (no time stamp) since the weather station was started
 In the mode of viewing rain history, press and hold the
Note: The rain reading will reset to 0 mm (in).
Note: After 20 seconds without pressing any button or touch the "
mode, The weather station will resume normal time display and display the last rainfall record you viewed.
When the rain shows the rain rate before entering the observation mode, it still shows the rain rate when
returning from the observation mode to the normal time display.
Wireless sensor connection
 The weather station can connect up to 1 Multi-combination wireless sensor and 3 different channels of temperature |
humidity wireless sensor,
 The weather station automatically searches for all wireless sensors within 3 minutes of power-on and registers the
sensor IDs. Each sensor generates a random ID after power-on to distinguish the sensors.
 In the main display interface, press and release the "
channels.
Note: In view mode, the ID of the wireless sensor can be displayed.
 The temperature/humidity data of the additional channel wireless sensor needs to be displayed on the normal time
display interface. After selecting the channel in the viewing mode, touch the "
mode.
Note: The temperature and humidity values shown in the OUTDOOR REMOTE column after exit are the selected
channels. At the same time, in the channel icon (displaying the position of A15), the number of channels is
displayed: OUTDOOR (representing Multi-combination wireless sensor) | 1 or 2 or 3 (representing 3 channels
of temperature | humidity wireless sensor))
Note: When the weather station loses sensor signals or the sensor is not connected to the channel, the value of the
channel is displayed as "--"
 If you need to add a new sensor or replace the sensor. In channel view mode, press and hold the
than 3 seconds, the weather station will search for the 3 minute signal again, and the new channel sensor will be added
to the weather station within 3 minutes.
Note: When adding a new sensor or replacing a sensor (old sensor replacement battery), you need to turn on the
meteo – SP89 Manual
" button to view the rain history
" button for 3 seconds to convert the display to cumulative value of
" " button for 3 seconds to clear all history of rain.
" location button at any time to exit the view
" button to view the value of the wireless sensor on the different
22
" location button to exit the viewing
" " button for more