Loading The Batteries; Channel Space Switching - Kenwood VR Series Instruction Manual

Center speaker
ery
ae
'
\
A Front
speaker ,
g Listening \
positton \
Subwoofer
SSuneund
speaker
Channel space switching
(Except for the USA, Canada, UK, Europe and Austratia)
| Tne space between radio channels has been set to the one that
prevails in the area to which the system is smipped. However, if the
current channel space seittng does not match the setting in the area
where the system 's to be used. forinstance when you move from area
1 or area 2 shown in the following table or vice versa. proper reception
of AM/FM broadcasts cannot be expected. in this case. change the
channel spacé setting in accordance with your area by referring to
Nl the following table.
CHANNEL
Space Frequency
FM. 100 kHz
AM: 10 kHz
FM: 50 kHz
AM: 9 kHz
USA. Canada and South
American countnes
a sowcoen
@ Turn power off.
"| =
an Bee iT mi
Blinks. -
I
J be it _ we
VR/KRF-¥ SERIES (En/KM)
Preparing the remote control (RC-RO607, RC-ROS07) _
SEEN SARIN RUE RE RE RRR IR ERROR EME, Sh sy
Loading the batteries
* insert four AAA-size (LRO3} batteries as indicated by the polarity
markings.
PNP ERTS
When the STANDBY indicator is lit, the power turns ON when you press
the POWER
key on the remote controt. When the power comes ON,
press the key you want to operate.
Operating range
{Approx.} Remote sensor
9:9
\388} Model: RC-RO6O7
a RC-RO507
Infrared ray system
* When pressing more than one remote contro! key successively,
press the keys securely by leaving an interval of 1 second or more
between keys.
Notes
1 The supplied batteries may have shorter lives than ordinary batteries
due to use during operation checks.
3. Placing the remote sensor in direct sunlight, or in direct light from a
high frequency fluorescent lamp may cause a malfunction.
in such a case, change the location of the system installation to
prevent malfunction.
~* we