Advertisement
Available languages
Available languages
Before
You Call For Service
Problem
No Power,
Cabinet Temperature
too High.
Possible
Cause
What to do
A fuse In your home may
be blown or the circuit
breaker tripped,
Replace fuse or reset circuit breaker
Power
surge.
Unplugthe Wine Cooler, wait three
minutes and then plug it back ino
Plug not fully inserted Into
Make sure the 3-prong plug is fully
waUoutteL
inserted intoouUet
Temperature
setting,
Vedfy the temperaturecontrolsetting
and adjust if naccessary.
Door not shut properly
or opened excessively
Ensure that the door is fully closed
and that the gasket is sealtng against
the cablneL Open the doors only as
needed and for short pedods of time
Recently
added a large
quantity
of warm wine
to the cabinet
Limitthe quantity of warm wine
being Introduced to the cabinet at the
same time, Attempt to stagger the
load introduction if possible.,
Condensation
on the
cabinet and/or doors°
High humtdlty conditions
fn the home,
The condensationwill subsideonce
humidityconditionsreturn to normal.
Door not shut properly
or opaned excessively,
Ensure that the doer is futty closed
and that the gasket ts sealing against
the cabinet Open the door only as
needed and for short pedods of time,
If none of the above has rectified the situation, please contact our customer care
department at 1-80O-4MY-HOME
10
Advertisement
