Note: Remove the film that covers the thermal pad (if any) when installing the M.2 solid-state drive.
M.2 solid-state drive bracket
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, remove these parts in order:
• "Computer cover" on page 26
• "Optical drive" on page 27
• "Front bezel" on page 30
• "Drive bay assembly" on page 31
• "M.2 solid-state drive and heat sink" on page 34
Replacement procedure
.
37
Chapter 4
CRU replacement