Enter The Bios Menu; Navigate In The Bios Interface; Change The Display Language Of Uefi Bios; Change The Display Mode Of Uefi Bios (For Selected Models) - Lenovo ThinkCentre M70s Gen 4 User Manual

Enter the BIOS menu

Restart the computer. When the logo screen is displayed, press F1 or Fn+F1 to enter the BIOS menu.
Note: If you have set BIOS passwords, enter the correct passwords when prompted. You also can select No
or press Esc to skip the password prompt and enter the BIOS menu. However, you cannot change the
system configurations that are protected by passwords.

Navigate in the BIOS interface

Attention: The default configurations are already optimized for you in boldface. Improper change of the
configurations might cause unexpected results.
Depending on your keyboard, you can navigate in the BIOS interface by pressing the following keys, or
combinations of Fn and the following keys:
Key
F1 or Fn+F1
Esc or Fn+Esc
↑↓ or Fn+↑↓
← → or Fn+← →
+/– or Fn++/–
Enter
F9 or Fn+F9
F10 or Fn+F10

Change the display language of UEFI BIOS

UEFI BIOS supports three or four display languages: English, French, simplified Chinese, and Russian (for
selected models).
To change the display language of UEFI BIOS:
1. Select Main ➙ Language and press Enter.
2. Set the display language as desired.

Change the display mode of UEFI BIOS (for selected models)

You can use UEFI BIOS in the graphic mode or the text mode according to your needs.
The keys on the keyboard used to perform various tasks are displayed at the bottom of the screen. In
addition to the keyboard, you also can use the mouse to make selections.
To change the display mode of UEFI BIOS:
1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1.
2. Select Main ➙ Setup Mode Select and press Enter.
3. Set the display mode as desired.
Function
General Help
Exit the submenu
Locate an item
Move keyboard focus
Change value
Enter the submenu
Setup Defaults
Save and exit
Chapter 3
.
Advanced configurations
19