Related Manuals for klover THERMOAURA
Summary of Contents for klover THERMOAURA
- Page 1 Pellet boiler stove ENGLISH THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS INSTALLATION, USE, MAINTENANCE AND HELPFUL TIPS rev 1.1 date 25/01/2021...
- Page 3 Ref. Annex III EU Regulation no. 305/2011 DoP/KLOVER-054 Identification number : HA, HCL, CLH, SLP120 ThermoAura, ThermoClass, Class Hydra, Style 120 Model and/or lot no. and/or serial no. (Art. 11-4) Plus Intended use of the product according to the relevant...
-
Page 4: Table Of Contents
THE MACHINE AND THE PELLETS ..........................4 ................................4 OMPONENTS OF THE APPLIANCE THERMOAURA..............................7 VERALL DIMENSIONS FOR THERMOCLASS .............................. 8 VERALL DIMENSIONS FOR THERMOAURA ............................9 ONNECTIONS DATA SHEET FOR THERMOCLASS ............................ 10 ONNECTIONS DATA SHEET FOR ..................................11 ECHNICAL PECIFICATIONS .................................... - Page 5 EN - Rev. 1.1 Dear client, First of all we would like to thank you for choosing a “KLOVER” product and we hope you will be satisfied with this product. Carefully read the manual and warranty certificate on the last page of this User guide.
-
Page 6: Introduction
They will be responsible for the definitive installation of the appliance and its proper operation. KLOVER srl shall not be held liable if these precautions are not observed. - During the installation and use of the appliance, all local regulations - including those referring to national and European Standards - must be observed. -
Page 7: The Machine And The Pellets
- This user guide constitutes an integral part of the appliance. If the product is sold to another user, this manual must be passed on to the new owner. KLOVER S.R.L. DECLINES ALL LIABILITY IN CASE OF ACCIDENTS DUE TO FAILURE TO COMPLY WITH THE SPECIFICATIONS OF THIS MANUAL. - Page 8 PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 REAR VIEW CE label Opening with technical data, serial for optional connection to number and model. safety valve. Flue gas outlet. Delivery pipe. Intake pipe. Return pipe.
- Page 9 PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 LEFT SIDE VIEW Pellet tank. Front fan for hot air. Flue gas intake device. Overpressure valve. Flue pressure switch. RIGHT SIDE VIEW Safety valve (2.5 bar).
-
Page 10: Overall Dimensions For Thermoaura
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 Overall dimensions for THERMOAURA... -
Page 11: Overall Dimensions For Thermoclass
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 Overall dimensions for THERMOCLASS... -
Page 12: Connections Data Sheet For Thermoaura
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 Connections data sheet for THERMOAURA REAR VIEW Description of connections M = System Delivery 3/4" M R = System Return 3/4" M X = Safety valve drain 1/2"... -
Page 13: Connections Data Sheet For Thermoclass
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 Connections data sheet for THERMOCLASS REAR VIEW Description of connections M = System Delivery 3/4" M R = System Return 3/4" M X = Safety valve drain 1/2"... -
Page 14: Technical Specifications
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 Technical Specifications Heat input (nominal setting) kW (Kcal/h) 15.6 (13,420) Heat input (reduced setting) kW (Kcal/h) 4.4 (3,780) Nominal thermal output kW (Kcal/h) 15.0 (12,900) Reduced thermal power kW (Kcal/h) 4.3 (3,700) -
Page 15: Pellet Properties
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 Pellet properties The appliance has been tested with all types of pellets available on the market. The pellets must have the following properties: - Diameter 6 mm. -
Page 16: Spaces Around And Above The Appliance
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 The unit must be installed on a floor with a suitable load capacity. If the existing building does not fulfil this requirement appropriate measures (e.g. load distribution plate) must be taken. -
Page 17: The Flue And Connection To The Same
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 If there are other heating or extraction devices inside the room, the air vents must guarantee a sufficient amount of air for properly operating all the devices. -
Page 18: Chimney
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 - It is forbidden to allow other air intake conduits and system pipes to transit inside the flue gas pipes, even if they are over-sized. FURTHER SPECIFICATIONS TO BE CONSIDERED - The appliance works with the combustion chamber in depression and the flue pipe in pressure;... -
Page 19: Distance < 5M
Do not pass electric cables in the immediate vicinity of the flue gas pipe, unless they are insulated with suitable materials. KLOVER srl declines all responsibility for injury to persons and animals or damage to objects due to failure to connect the appliance to earth or to comply with IEC specifications. -
Page 20: Control Of A Possible Three-Way Motorized Valve For Dhw System Management
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 BROWN COUPLED BOILER PUMP R.T. CONTACT BLUE Control of a possible three-way motorized valve for DHW system management The pellet appliance is equipped as standard with a control for a possible 3-way motorised valve to be installed on the domestic water circuit based on the selected system type (see “System... -
Page 21: Hydraulic Connection
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 HYDRAULIC CONNECTION The plumbing connections must be made in a rational way using the connections on the template of the appliance. The appliance can be coupled with any other boiler already installed on the system. In this case it is essential to fit all the necessary safety devices and shut-off valves based on the system and intended use. -
Page 22: The Display
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 THE DISPLAY The appliance's operating mode is displayed on the console. After turning on the menu, it is possible to choose from many types of display and available settings according to the selected menu. - Page 23 EN - Rev. 1.1 PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS The meanings of the status signals appearing on the top right side of the display are described below (2nd LED SERIES). - LED 1: the LED lights up when the daily programme of the on off settings is active.
-
Page 24: The Menu
EN - Rev. 1.1 PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS Switches the appliance on and/or off when pressed for Working.. 2 seconds. ON/OFF In alarm block.. Releases the alarm. Outlet Menu/programming Moves you to the previous menu level, saving the mode.. - Page 25 PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 MENU LEVEL SELECTION MEANING POSSIBLE VALUES 03 – 01 – 01 ACTIVATE TIMER Enable/disable set programs ON – OFF Submenu 03 – 02 – daily program Allows you to enable, disable and set the programmable thermostat daily programme functions.
- Page 26 PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 PROGRAMME 3 MENU LEVEL SELECTION MEANING POSSIBLE VALUES 03 – 03 – 20 START PROG 3 Turn-on time of the third programme Time – OFF 03 – 03 – 21...
- Page 27 By reducing the value by a single unit, the flue gas extractor speed (and therefore the flow of combustion air) is reduced by about 3%. * Unauthorised access can cause serious damage to equipment, objects and the environment, as well as personal injuries. Klover declines all responsibility deriving from improper calibration of these values.
-
Page 28: Initial Start-Up
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 INITIAL START-UP System configuration Before commissioning the appliance it is advisable to choose which type of system it has been connected to, by accessing “Menu 06 – System type”. - Page 29 PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 T.A. Bollitore cylinder accumulo Plumbing layout 3 involves connecting the boiler stove to a heating system managed by one or more room thermostats. These are connected to the terminal located inside the appliance’s left technical compartment. DHW will be generated by means of a hot water cylinder fitted outside of the boiler and controlled by a temperature probe connected to the appliance.
-
Page 30: Initial Filling Of The System
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 Plumbing layout 4 involves connecting the boiler to a centralised puffer controlled by a temperature probe connected to the appliance. The boiler stove will therefore operate only at the set temperature of the centralised puffer (“SET PUFFER”... -
Page 31: Switch-Off Cycle
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 If the ignition fails, the display will show the alarm “NO IGNIT ALARM”. The alarm may also occur if the brazier is dirty; in this case, clean the brazier and re-start. -
Page 32: Changing The Air Fan Speed
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 70° After setting the desired value, press button 4 or wait a few seconds to confirm. During the working mode the appliance enters “Economy mode operation” when that temperature value is reached. -
Page 33: Problems, Alarms, Useful Tips
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 Auto The air fan can be can be switched off (“OFF”), manually set to a speed value (of between 1 and 5), or set to automatic mode (“Auto”), in which case the fan speed is associated with the operating power value set under SET POWER. -
Page 34: Alarm Signals
EN - Rev. 1.1 PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS ...the flue pipe is dirty, blocked or not correctly installed If the flue is dirty, blocked or incorrectly manufactured, pellet loading will not start, thus the appliance will not switch itself on. -
Page 35: Cleaning And Maintenance
EN - Rev. 1.1 PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS AL 9 - WATER PROBE ACTIVE ALARM Faulty or disconnected water temperature probe. Screw feed TRIAC error. When the screw feed gear motor does not stop for at least 0.2 seconds during the maximum work interval of 8.0 seconds. -
Page 36: Non-Routine Cleaning
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 Use the dedicated cleaning hook for the front scraper to operate the front rod, moving it forward and backwards to clean off combustion residues from the air exchanger (Figure 1). - Page 37 PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 Perform routine cleaning; After removing the underlying front panel (Figure 7), remove the cover of the inspection port by loosening the two screws (Figure After removing the cover, vacuum the residues inside the inspected compartment (Figure After completing this operation, put the previously removed components back in place.
-
Page 38: Annual Cleaning
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 To ensure correct operation, it is necessary to remove the sawdust deposited on the bottom of the tank (Figure 10) least once every 30 days. The pellet tank must be emptied at the end of every season. - Page 39 PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 Unscrew the four hex-headed screws, following the sequence given in the photo (Figure 13). Remove the upper cap, fully sliding out the internal scrapers upwards (Figure 14).
-
Page 40: Cleaning The Ceramic Glass
You must periodically check the seals because the latter guarantee the air- and water-tightness of the appliance and its good functioning; if they are worn or damaged you need to be replace them immediately by contacting a Klover Authorised technical assistance centre. -
Page 41: Parameters Table
The following parameters are already stored during the testing of the appliance directly in the factory; these parameters are the result of special tests using several types of pellets and must not be changed without the authorisation of Klover srl so as not to impair the operation of the appliance. - Page 42 EN - Rev. 1.1 PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS Database Parameter Menu level Description Display Measurement Value field Pr01 M08 – 6 – 01 Ignition cycle maximum time IGNIT- MINUTES Minutes 5 – 25 Pr02 M08 –...
-
Page 43: Wiring Diagram
PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1 WIRING DIAGRAM SCHEDA ESPANSIONE Q055 Q055 EXPANSION BOARD (OPZIONALE) (OPTIONAL) LEGENDA COMPONENTI: COMPONENT LEGEND: M1 = Motoriduttore coclea M1 = Screw feeder gearmotor M2 = Motoriduttore pulizia turbolatori... -
Page 44: Standard Warranty Conditions
The Klover Warranty will remain in effect for a period of 2 years from the date of purchase, if proven by a delivery note or other proof of purchase (e.g. receipt), stating the name of the seller, the product that was bought, and the date of purchase. - Page 45 Klover Products must undergo functional testing before any related masonry works are carried out (for example before tiling, installation of pilasters, or painting of the walls). Klover Srl is not liable for any costs incurred as a result of removal and/or reconstruction of related installations, or for any other ancillary intervention even if it is the result of works to replace defective parts.
- Page 46 PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS EN - Rev. 1.1...
- Page 47 EN - Rev. 1.1 PELLET BOILER STOVE THERMOAURA, THERMOCLASS, CLASS HYDRA, STYLE 120 PLUS...
- Page 48 Cod. CS.IST.HA-IT KLOVER Srl Via A. Volta, 8 37047 San Bonifacio (VR) VAT No. 02324280235 www.klover.it...
Need help?
Do you have a question about the THERMOAURA and is the answer not in the manual?
Questions and answers