Bosch Professional GKF 12V-8 Original Instructions Manual page 8

8 | English
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for milling edges and profiles in
wood, plastic and non-metallic lightweight materials while
resting firmly on the workpiece.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
A)
(1) Battery
A)
(2) Battery release button
(3) Temperature monitoring/overload protection indic-
ator
(4) Battery charge indicator
(5) On/off switch
(6) Marking arrow for spindle lock
(7) Spindle locking lever
(8) Routing depth coarse adjustment button
(9) Cap nut with collet
(10) Thumbwheel for fine adjustment of routing depth
(11) Routing depth adjuster fixing screw
(12) Base plate
(13) Handle
(14) Routing depth adjuster locking wheel
(15) Collet
(16) Tool holder
A)
(17) Router bit
(18) Open-ended spanner (17 mm)
(19) Smooth guide column
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Edge router
Article number
Rated voltage
No-load speed
Compatible collets
Router cage stroke
Weight according to
EPTA-Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperature
B)
during operation and during
storage
1 609 92A 5AN | (24.03.2020)
Edge router
Recommended rechargeable
batteries
Recommended chargers
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
Technical data determined using the battery that comes with the
product.
Noise/Vibration Information
Noise emission values determined according to
EN 62841‑2‑17.
Typically, the A-weighted sound pressure level of the power
tool is 71 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection !
Vibration total values a
determined according to EN 62841‑2‑17: a
K=1.5 m/s
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
GKF 12V-8
and organising workflows correctly.
3 601 F6B 0..
Fitting
V= 12
–1
min 13000
u
mm 6/8
inches ¼
mm 36
A)
kg 1.3–1.5
Battery Charging
°C 0 to +35
u
°C –20 to +50
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
(triax vector sum) and uncertainty K
h
2
.
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
GKF 12V-8
GBA 12V...
GAL 12...
GAX 18...
2
<2.5 m/s ,
h
Bosch Power Tools