Switching Between Psk31 And Psk63; Transmitting Character Strings From Usb Keyboard; Transmitting The Input Character String Immediately; Temporarily Placing Character Strings In The Character String Buffer Before Transmission - Kenwood TS-890S Instruction Manual

Switching between PSK31 and PSK63

This transceiver supports PSK31 as well as PSK63. The latter has
a transfer rate that is twice that of the BPSK mode. Perform the
following step to toggle between PSK31 and PSK63.
Press F3 [31/63].
It is possible to toggle between BPSK31 and BPSK63 or
between QPSK31 and QPSK63. The display to the right of the
status bar toggles between <<
when the mode is switched.
This is fixed at BPSK when the PSK63 mode is selected.
●

Transmitting Character Strings from USB Keyboard

A commercially available USB keyboard can be used to input and
transmit character strings.

Transmitting the Input Character String Immediately

1 Connect the USB keyboard to
2 Press F3 [DECODE] to display the PSK
communication screen.
3 Press [F12] on the USB keyboard to switch this
transceiver to the TX mode.
The [BUSY/TX] LED lights up in red, and <<
displayed in the status bar.
4 Enter a character string using the USB keyboard.
• The input character string is displayed in the character string
buffer and transmitted immediately.
• In the character string buffer, the color of the individual
characters change successively once they are transmitted.
• Characters that have been transmitted appear successively
in the TX/RX details display area.
5 Press [F12] on the USB keyboard to switch this
transceiver to the RX mode.
If there remain characters in the character string buffer
●
that are not transmitted when [F12] is pressed in step 5,
<< >> is displayed in the status bar. After
transmission of all the character strings is complete, the
transceiver switches to the RX mode and the light of the
[BUSY/TX] LED and <<
1 Connect the USB keyboard to
2 Press F3 [DECODE] to display the PSK
3 Enter a character string using the USB keyboard.
>> and << >>
4 Press [F12] on the USB keyboard to send out the
5 Press [F12] on the USB keyboard to switch this
(USB-A).
>> is
>> display go off.
• The chart above shows the characters and symbols that can be
COMMUNICATING AIDS 5
Temporarily Placing Character Strings in the
Character String Buffer before Transmission
communication screen.
The input character string is stored temporarily in the character
string buffer.
character string that is stored in the character
string buffer.
• Upon entering the TX mode, the [BUSY/TX] LED lights up in
red, and << >> is displayed in the status bar.
• In the character string buffer, the color of the individual
characters change successively once they are transmitted.
transceiver to the RX mode.
If there remain characters in the character string buffer
●
that are not transmitted when [F12] is pressed in step 5,
<< >> is displayed in the status bar. After
transmission of all the character strings is complete, the
transceiver switches to the RX mode and the light of the
[BUSY/TX] LED and <<
Pressing [ESC] while transmission of the character
●
strings is in progress switches this transceiver to the RX
mode. Transmission of the character strings stops, and
character strings in the character string buffer that are
not yet transmitted are cleared.
Time stamp and frequency information can be added to
●
the TX or RX data that is displayed in the TX/RX details
display area.
Sending a character string using the USB keyboard while
●
the TX/RX display is paused by pressing F3 [PAUSE]
cancels the paused state.
The character strings that can be placed temporarily in
●
the character string buffer can contain a maximum of
4300 characters.
Characters and symbols that can be input using a USB
●
keyboard are as follows.
A B C D E F G
P Q R S T U V
0 1 2 3 4 5
a b c d e f
p q r s t u
À Á Â Ã Ä Å Æ
Ï Ð Ñ Ò Ó Ô Õ
à á â ã ä å æ
ï ð ñ ò ó ô
ÿ ß
! " # $ % &
: ; < = > ? @
} ~ ¡ ¢ £ ¤
¯ ° ± ² ³ ´
¾ ¿ No ÷
input when "English" is selected in Menu [9-01]. To input
Japanese characters, please download and refer to the
Japanese instruction manual from our website.
(USB-A).
>> display go off.
H I J K L M
W E X Y Z
6 7 8 9
g h i j k l m
v w x y z
Ç È É Ê Ë Ì
Ö Ø Ù Ú Û Ü
ç è é ê ë ì
õ ö ø ù ú û ü
' ( ) * + , -
[ \ ] ^ _ `
¥ ¦ § ¨ © ª «
µ ¶ • ¸ ¹ º »
Space Line Break
N O
n o
Í Î
Ý Þ
í î
ý þ
. /
{ |
¬ ®
¼ ½
5-25