Switching Power On/Off; Squelch Threshold Level - Kenwood TH-22A Instruction Manual

RECEIVING
SWITCHING POWER ON/OFF
To switch ON your transceiver, turn the PWRVVOL
control clockwise and set it at the 11 o'clock position.
Various indicators, including a receive frequency, appear
on the display. Due to the automatic squelch feature, no
sound will be heard from the speaker until you receive a
call.
Use the same control to adjust the volume more
precisely while receiving your first call, or press [MON]]
and adjust the PWR/VOL control to set the background
noise to a comfortable level. Pressing [MONI] always
allows you to listen to activity on the selected frequency
as long as this key is held down.
To switch OFF the transceiver, turn the PWRAVVOL
control counterclockwise until it clicks at the OFF
position.
SQUELCH THRESHOLD LEVEL
The receiver squelch is automatically controlled by the
transceiver's microcomputer based on the measured
noise level. However, you can override the
microcomputer setting, if you wish.
1 Turn the ENC/SQL control to select a frequency that
is not busy.
2 Press [FJ], [MONI].
e The current squelch threshold level appears.
e The default is "5".
3 Turn the ENC/SQL control to select the desired level
(0 to 9).
e 0: Selects lowest threshold level (squelch open).
e $: Selects highest threshold level.
4 Press any key other than [LAMP] or [MONI].
13