Setting Up Your Phone - Sharp ROUVO V Manual

Setting up your phone

Your phone already has a SIM card installed. For an optimal wireless
experience, use the SIM installed in your new phone.
However, if you purchase this phone without SIM card pre-installed, or
if you wish to replace your SIM card for any reason, follow the steps
below. The following steps also guide you to install your microSD
card.
1. Use the SIM ejector tool.
Use the supplied SIM ejector tool to insert into the small hole on
the SIM/SD Card tray.
2. Pull the tray out to place SIM/microSD card.
Pull the tray out and place your Nano SIM card and microSD card
on the tray. Make sure you align the cards as designated by the
tray.
3. Push the tray back into its place.
Slide the tray attached with your Nano SIM card and microSD card
all the way into the slot.
SIM card tray
NOTE: The microSD card is sold separately.
microSD
Nano SIM