Panasonic SC-HC57 Owner's Manual page 7

3
Attach the wall mount bracket to the wall with 2
screws (not supplied). (Both sides)
≥ Use a spirit level to ensure both wall mount brackets are
level.
≥ Make sure that the screw used and the wall are strong
enough to support the weight of at least 33 kg (72.8 lbs).
At least 30 mm (1
4 mm
( /
5
32
4
Fix the safety holder onto the unit with the
screw (supplied).
{. Screw tightening torque: 50 N0cm (0.4 lbf0ft) to 70
N0cm (0.5 lbf0ft).
5
Attach the fall prevention cord (not supplied) to
this unit.
≥ Use a cord of less than ‰2.0 mm (
capable of supporting over 33 kg (72.8 lbs).
/
3 q)
16
‰7.5 mm ( 19 /
64
‰9.4 mm ( /
3 q)
8
q)
Wall mount bracket
Screw
(supplied)
/ q), which is
5
64
Cord (not supplied)
6
Hook the unit securely onto the wall mount
brackets with both hands.
≥ Connect the FM antenna and the AC power supply cord
to the unit before hanging the unit onto the wall. (
≥ After hanging the unit, release your hand carefully to
confirm the unit sits securely on the wall.
q) to
7
Drive the safety holder fixing screw
(not supplied) to secure the safety holder onto
the wall.
≥ Make sure that the screw used and the wall are strong
enough to support the weight of at least 33 kg (72.8 lbs).
8
Attach the fall prevention cord (not supplied) to
the wall.
≥ Make sure that the screw used and the wall are strong
enough to support the weight of at least 33 kg (72.8 lbs).
Screw eye (not supplied)
Cord (not supplied)
Wall
Safety holder
Fixed to the wall
Safety holder fixing screw
(not supplied)
8)
Wall
7
RQT9633