Others - Panasonic SC-HC57 Owner's Manual

Using AirPlay with this
unit's speakers
When this unit is on the same network as the
compatible device, you can select this unit as the
speakers.
Preparation
≥ Connect this unit to the same network as the
compatible device. (
≥ Turn on the compatible device.
1
Start iTunes on your Mac/PC or the Music App
on your iOS device.
≥ If the Music App on your iOS device is used,
select the file that is to be played.
2
Select this unit from the AirPlay
bottom right-hand corner of the display.
{. Check the volume settings before starting the playback.
(When AirPlay is used for the first time, the volume may
be output at the maximum setting.)
≥ If you have not changed the name, this unit will be
displayed as "Panasonic HC57 _ _ _ _ _ _"
e.g., iPhone iOS 5.0
e.g., iTunes 10.5
(Bottom right)
3
Start play.
≥ This unit can be set to turn on automatically when this unit is
selected as the output speakers. (
≥ Playback of other audio sources will stop and AirPlay output
will have priority.
≥ Volume changes on the iOS device or iTunes will be applied
to this unit. (Refer to the iTunes Help for the required settings
in iTunes.)
≥ AirPlay will not work when playing back videos on iTunes.
*1: " _ " stands for a digit that is unique to each set.
*2: The name that is displayed for this unit can be changed
from the "Edit STEREO SYSTEM name" settings in
"Method 2". ( 12)
14
RQT9633
12)
icon at the
*
.
1, 2
15)

Others

Automatic standby
As a factory preset, this unit will always turn off
automatically if there is no sound output and no
operation for 30 minutes.
To cancel this function
1
Press [SETUP] repeatedly to select
"AUTO OFF" and then press [OK].
2
Press [3, 4] to select "OFF" and then press
[OK].
≥ To turn automatic standby on, select "ON" in step 2.
≥ This setting cannot be selected when "FM" is the source.
Display brightness
The brightness of this unit's display can be
changed.
1
Press [SETUP] repeatedly to select "DIMMER"
and then press [OK].
2
Press [3, 4] to select "ON" and then press
[OK].
To cancel the dimmer, select "OFF" in step 2.
Changing the main unit and
remote control code
When other Panasonic equipment responds to the
supplied remote control, change the remote control
code.
1
Press [CD] to select "CD".
2
Press and hold [CD] on the main unit and [3]
on the remote control until the main unit's
display shows "REMOTE 2".
3
Press and hold [OK] and [3] on the remote
control for at least 4 seconds.
To change the mode back to "REMOTE 1", repeat the steps
above by replacing [3] with [4].